Yr Athro Karen Holford

2022

• Almudaihesh, F. et al. 2022. A comparison study of water diffusion in unidirectional and 2D woven carbon/epoxy composites. Polymer Composites 43 (1), pp.118-129. (10.1002/pc.26361)
• McCrory, J. P. et al. 2022. Acoustic emission monitoring of metals. In: Grosse, C. U. et al., Acoustic Emission Testing: Basics for Research – Applications in Engineering. Springer. , pp.529-565. (10.1007/978-3-030-67936-1_18)

2021

• Abdulaziz, A. H. et al., 2021. Experimental three-point bending test of glass fibre aluminium honeycomb sandwich panel with acoustic emission damage assessment. Insight - Non-Destructive Testing & Condition Monitoring 63 (12), pp.727-733. (10.1784/insi.2021.63.12.727)
• Abdulaziz, A. H. et al., 2021. Acoustic emission wave propagation in honeycomb sandwich panel structures. Composite Structures 277 114580. (10.1016/j.compstruct.2021.114580)
• Grigg, S. et al. 2021. Wireless acoustic emission systems. In: Grosse, C. U. et al., Acoustic Emission Testing: Basics for Research – Applications in Engineering. Springer Tracts in Civil Engineering Vol. 2366-2.Springer, Cham. , pp.711-729. (10.1007/978-3-030-67936-1_23)
• Almudaihesh, F. et al. 2021. An assessment of the effect of progressive water absorption on the interlaminar strength of unidirectional carbon/epoxy composites using acoustic emission. Sensors 21 (13) 4351. (10.3390/s21134351)
• Wang, Y. et al. 2021. Detection and evaluation of vascular network based self-healing concrete using acoustic emission. Presented at: World Conference on Acoustic Emission 2019 (WCAE) Guangdong, China 5-8 November 2019. Published in: Shen, G. , Zhang, J. and Wu, Z. eds. Advances in Acoustic Emission Technology: Proceedings of the World Conference on Acoustic Emission—2019. Vol. 259.Springer Proceedings in Physics Springer. , pp.299-311. (10.1007/978-981-15-9837-1_25)

2020

• McCrory, J. P. et al. 2020. Optimisation of acoustic emission wavestreaming for structural health monitoring. Structural Health Monitoring 19 (6), pp.2007-2022. (10.1177/1475921720912174)
• Pearson, M. et al. 2020. Optimized placement of parasitic vibration energy harvesters for autonomous structural health monitoring. Journal of Intelligent Material Systems and Structures 31 (11), pp.1403-1415. (10.1177/1045389X20922907)
• Almudaihesh, F. et al. 2020. The influence of water absorption on unidirectional and 2D woven CFRP composites and their mechanical performance. Composites Part B: Engineering 182 107626. (10.1016/j.compositesb.2019.107626)

2019

• Albadr, A. et al. 2019. Effects of honeycomb core on acoustic emission wave propagation in glass fibre composite plates. Presented at: 58th Annual British Conference on Non-Destructive Testing Telford, UK 3 - 5 September 2019.
• Middleton, C. A. et al., 2019. Detecting and monitoring cracks in aerospace materials using post-processing of TSA and AE data. Metals 9 (7), pp.748. (10.3390/met9070748)
• Almudaihesh, F. et al. 2019. The influence of water absorption on the damage mechanism of unidirectional and 2D woven CFRP. Presented at: 22nd International Conference on Composite Materials (ICCM22 2019) Melbourne, Australia 11-16 August 2019. Proceedings of the 2019 International Conference on Composite Materials. Melbourne, VIC, Australia: Engineers Australia. , pp.1237-1242.
• Albadr, A. et al. 2019. Parametric study of honeycomb composite structure using open source finite element software. Presented at: 27th UK Association of Computational Mechanics Conference City, University of London, London, England April 2019.

2018

• Al-Jumaili, S. K. et al. 2018. Characterisation of fatigue damage in composites using an Acoustic Emission Parameter Correction Technique. Composites Part B: Engineering 151 , pp.237-244. (10.1016/j.compositesb.2018.06.020)
• Almudaihesh, F. et al. 2018. The effects of fibre architecture on water absorption induced degradation in CFRP laminates.. Presented at: 18th European Conference on Composite Materials (ECCM 2018) Athens, Greece 24-28 June 2018. 18th European Conference on Composite Materials (ECCM-18). Applied Mechanics Laboratory.
• Clarke, A. et al. 2018. Damage detection in high performance gears using a magnetoelastic sensor to measure rate of change of torque. Presented at: Leeds-Lyon Symposium on Tribology Leeds 4-7 September 2018.

2017

• Al-Azzawi, A. S. M. et al. 2017. Buckling and postbuckling behaviour of glare laminates containing splices and doublers. Part 1: instrumented tests. Composite Structures 176 , pp.1158-1169. (10.1016/j.compstruct.2017.04.030)
• Pearson, M. R. et al. 2017. Improved acoustic emission source location during fatigue and impact events in metallic and composite structures. Structural Health Monitoring 16 (4), pp.382-399. (10.1177/1475921716672206)
• Holford, K. M. et al. 2017. A new methodology for automating acoustic emission detection of metallic fatigue fractures in highly demanding aerospace environments: An overview. Progress in Aerospace Sciences 90 , pp.1-11. (10.1016/j.paerosci.2016.11.003)

2016

• Cockerill, A. et al. 2016. Determination of rolling element bearing condition via acoustic emission. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 230 (11), pp.1377-1388. (10.1177/1350650116638612)
• Al-Jumaili, S. K. et al. 2016. Acoustic emission source location in complex structures using full automatic delta T mapping technique. Mechanical Systems and Signal Processing 72-73 , pp.513-524. (10.1016/j.ymssp.2015.11.026)

2015

• Cockerill, A. et al. 2015. Use of high frequency analysis of acoustic emission signals to determine rolling element bearing condition. Journal of Physics. Conference Series 628 012074. (10.1088/1742-6596/628/1/012074)
• Al-Jumaili, S. et al. 2015. Parameter Correction Technique (PCT): A novel method for acoustic emission characterisation in large-scale composites. Composites Part B: Engineering 75 , pp.336-344. (10.1016/j.compositesb.2015.01.044)
• Crivelli, D. et al. 2015. Localisation and identification of fatigue matrix cracking and delamination in a carbon fibre panel by acoustic emission. Composites Part B: Engineering 74 , pp.1-12. (10.1016/j.compositesb.2014.12.032)
• Al-Jumaili, S. K. et al. 2015. Classification of acoustic emission data from buckling test of carbon fibre panel using unsupervised clustering techniques. Structural Health Monitoring 14 (3), pp.241-251. (10.1177/1475921714564640)
• McCrory, J. P. et al. 2015. Damage classification in carbon fibre composites using acoustic emission: A comparison of three techniques. Composites Part B: Engineering 68 , pp.424-430. (10.1016/j.compositesb.2014.08.046)
• Al-Azzawi, A. et al. 2015. Buckling and postbuckling behaviour of glare laminates containing splices and doublers: experimental and numerical investigation. Presented at: 3rd International Conf erence on Buckling and Postbuckling Behaviour of Composite Laminated Structures Braunschweig, Germany 25-27 March 2015. , pp.S65-S65.
• Cockerill, A. et al. 2015. Acoustic emission as an aid to understanding raceway damage in rolling element bearings [Abstract]. Presented at: 42nd Leeds-Lyon Symposium on Tribology Lyon, France 7-9 September 2015. Proceedings of the 42nd Leeds-Lyon Symposium on Tribology. Lyon: , pp.1.
• Pearson, M. R. et al. 2015. Improved acoustic emission damage source location during fatigue testing of complex structures. In: Proceedings of the 34th Conference and the 28th Symposium of the International Committee on Aeronautical Fatigue and Structural Integrity. ICAF. , pp.846-853.

2014

• Al-Azzawi, A. et al. 2014. Delamination characteristics of splices and doublers in glare laminates during buckling. Presented at: 11th World Congress on Computational Mechanics (WCCM XI) Barcelona,Spain 25 July 2014. , pp.S65-S65.
• Al-Jumaili, S. K. et al. 2014. Damage characterisation in composite materials under buckling test using acoustic emission waveform clustering technique. Presented at: The 53rd Annual Conference of The British Institute of Non-Destructive Testing Manchester, UK 9-11 September 2014.
• Al-Jumaili, S. K. et al. 2014. A Parameter Correction Technique (PCT) for acoustic emission characterisation in large-scale composites. Presented at: 31st European Conference on Acoustic Emission Testing (EWGAE) Dresden, Germany 3-5 September 2014.
• Cockerill, A. et al. 2014. Damage assessment of rolling element bearings using acoustic emission. Presented at: 16th International Workshop on Experimental Mechanics Cambridge, UK 7 - 11 July 2014.
• Crivelli, D. et al. 2014. Chebyshev descriptors for SHM with acoustic emission and acousto ultrasonics. International Journal of Structural Integrity 5 (3), pp.202-213. (10.1108/IJSI-04-2014-0013)
• Marks, R. et al. 2014. Optimisation of acoustic emission sensor positioning on aerospace structures using 3D scanning laser vibrometry. Presented at: 16th International Conference on Experimental Mechanics Cambridge, UK 7 - 11 July 2014.
• McCrory, J. et al. 2014. Automated corrected MAR calculation for characterisation of AE signals. Presented at: 31st European Conference on Acoustic Emission Testing (EWGAE) Dresden, Germany 3-5 September 2014.
• Pearson, M. R. et al. 2014. Airborne acoustic damage location for structural health monitoring applications. Presented at: ICEM 16 - 16th International Conference on Experimental Mechanics Cambridge, England 7-11 July 2014.

2013

• Crivelli, D. et al. 2013. Classification of acoustic emission data from Buckling Test of carbon fiber panel using neural networks. Presented at: 3rd European Aeronautics Science Network Workshop on Aerostructures Milan, Italy 11 October 2013.
• Elfergani, H. A. , Pullin, R. and Holford, K. M. 2013. Damage assessment of corrosion in prestressed concrete by acoustic emission. Construction and Building Materials 40 , pp.925-933. (10.1016/j.conbuildmat.2012.11.071)
• Featherston, C. et al. 2013. An autonomous structural health monitoring solution. Presented at: Microtechnologies 2013 Grenoble, France 24-26 April 2013. Proc. SPIE 8763, Smart Sensors, Actuators, and MEMS VI. Society of Photo-Optical Instrumentation Engineers (SPIE). , pp.876302. (10.1117/12.2018401)
• Holford, K. M. et al. 2013. Approaches to acoustic emission monitoring with applicability to key components in wind turbines. Presented at: 9th International Workshop on Structural Health Monitoring Stanford, CA, USA 10-12 September 2013.
• Kural, A. et al. 2013. Design and characterization of an ultrasonic lamb-wave power delivery system. IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control 60 (6), pp.1134-1140. (10.1109/TUFFC.2013.2676)
• Pullin, R. et al. 2013. Automated damage detection in composite components using acoustic emission. Key Engineering Materials 569-57 , pp.80-87. (10.4028/www.scientific.net/KEM.569-570.80)
• Shahidan, S. et al., 2013. Damage classification in reinforced concrete beam by acoustic emission signal analysis. Construction and Building Materials 45 , pp.78-85. (10.1016/j.conbuildmat.2013.03.095)

2012

• Aljets, D. et al., 2012. Acoustic emission source location on large plate-like structures using a local triangular sensor array. Mechanical Systems and Signal Processing 30 , pp.91-102. (10.1016/j.ymssp.2012.01.012)
• Eaton, M. J. , Pullin, R. and Holford, K. M. 2012. Acoustic emission source location in composite materials using Delta T Mapping. Composites Part A: Applied Science and Manufacturing 43 (6), pp.856-863. (10.1016/j.compositesa.2012.01.023)
• Eaton, M. J. , Pullin, R. and Holford, K. M. 2012. Towards improved damage location using acoustic emission. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 226 (9), pp.2141-2153. (10.1177/0954406212449582)
• Featherston, C. A. , Eaton, M. J. and Holford, K. M. 2012. Modelling the effects of geometric imperfections on the buckling and initial post-buckling behaviour of flat plates under compression using measured data. Strain 48 (3), pp.208-215. (10.1111/j.1475-1305.2011.00813.x)
• Pearson, M. R. et al. 2012. Energy Harvesting for Aerospace Structural Health Monitoring Systems. Journal of Physics. Conference Series 382 (1) 012025. (10.1088/1742-6596/382/1/012025)
• Pullin, R. et al. 2012. Identification of the onset of cracking in gear teeth Using acoustic emission. Journal of Physics. Conference Series 382 (1) 012050. (10.1088/1742-6596/382/1/012050)
• Pullin, R. et al. 2012. On the Development of a Damage Detection System using Macro-fibre Composite Sensors. Journal of Physics. Conference Series 382 (1) 012049. (10.1088/1742-6596/382/1/012049)

2011

• Eaton, M. J. et al. 2011. Characterisation of Damage in Composite Structures using Acoustic Emission. Journal of Physics: Conference Series 305 (1) 012086. (10.1088/1742-6596/305/1/012086)
• Eaton, M. J. et al. 2011. Acoustic Emission Source Characterisation in Large-Scale Composite Structures. Applied Mechanics and Materials 70 , pp.381-386. (10.4028/www.scientific.net/AMM.70.381)
• Pearson, M. R. et al. 2011. Impact Damage Detection and Assessment in Composite Panels using Macro Fibre Composites Transducers. Journal of Physics: Conference Series 305 (1) 012049. (10.1088/1742-6596/305/1/012049)
• Eaton, M. J. et al. 2011. Principal component analysis of acoustic emission signals from landing gear components: an aid to fatigue fracture detection. Strain 47 (Supp.1), pp.e588-e594. (10.1111/j.1475-1305.2009.00661.x)
• Elfergani, H. A. , Pullin, R. and Holford, K. M. 2011. Acoustic Emission Analysis of Prestressed Concrete Structures. Journal of Physics: Conference Series 305 (1) 012076. (10.1088/1742-6596/305/1/012076)
• Hensman, J. et al., 2011. Spatial scanning for anomaly detection in acoustic emission testing of an aerospace structure. Mechanical Systems and Signal Processing 25 (7), pp.2462-2474. (10.1016/j.ymssp.2011.02.016)
• Holford, K. M. and Eaton, M. J. 2011. Recent advances in acoustic emission. Presented at: World Conference on Acoustic Emission - 2001 Beijing Beijing, China 24-26 August 2011. Published in: Shan, G. and Wu, Z. eds. Proceedings of World Conference on Acoustic Emission - 2011. Chinese Society for Non-destructive Testing. , pp.58-66.
• Kural, A. et al. 2011. Wireless power transmission using ultrasonic guided waves. Journal of Physics. Conference Series 302 (1) 012088. (10.1088/1742-6596/305/1/012088)
• Muhamad Bunnori, N. , Lark, R. J. and Holford, K. M. 2011. The use of acoustic emission for the early detection of cracking in concrete structures. Magazine of Concrete Research 63 (9), pp.683-688. (10.1680/macr.2011.63.9.683)

2010

• Featherston, C. A. et al. 2010. Development of a methodology to assess mechanical impulse effects resulting from lightning attachment to lightweight aircraft structure. Presented at: 7th BSSM International Conference on Advances in Experimental Mechanics Liverpool, UK 7 - 9 September.
• Featherston, C. A. et al. 2010. Development of a Methodology to Assess Mechanical Impulse Effects Resulting from Lightning Attachment to Lightweight Aircraft Structures. Applied Mechanics and Materials 24-25 , pp.129-134. (10.4028/www.scientific.net/AMM.24-25.129)
• Pullin, R. et al. 2010. Detection of cracking in gear teeth using Acoustic Emission. Applied Mechanics and Materials 24-25 , pp.45-50. (10.4028/www.scientific.net/AMM.24-25.45)
• Pullin, R. et al. 2010. Detection of cracking in gear teeth using acoustic emission. Presented at: 7th BSSM International Conference on Advances in Experimental Mechanics Liverpool, UK 7-9 September 2010.
• Pullin, R. et al. 2010. Validation of acoustic emission (AE) crack detection in aerospace grade steels using Digital Image Correlation (DIC). Presented at: 7th BSSM International Conference on Advances in Experimental Mechanics Liverpool, UK 7 - 9 September 2010. Published in: Mines, R. A. W. and Dulieu-Barton, J. M. eds. Advances in Experimental Mechanics. Applied Mechanics and Materials Vol. 24-25. Zurich: Trans Tech Publications. , pp.221-226. (10.4028/www.scientific.net/AMM.24-25.221)

2009

• Aljets, D. et al., 2009. Classification of delamination and matrix cracking in carbon fibre composite plates using Acoustic Emission (AE). Presented at: Proceedings of the ASME International Design Engineering Technical Conferences, and Computers and Information in Engineering Conference 2009 (DETC2009) San Diego, USAVol. 1., pp.29-36.
• Davies, H. C. et al. 2009. Pedestrian protection using a shock absorbing liquid (SALi) based bumper system. Presented at: 21st International Technical Conference on the Enhanced Safety of Vehicles Stuttgart, GermanyVol. 09-002.
• Eaton, M. J. et al. 2009. Use of Macro Fibre Composite Transducers as Acoustic Emmission Sensors. Remote Sensing 1 (2), pp.68-79. (10.3390/rs1020068)
• Featherston, C. A. et al. 2009. Structural health monitoring of buckling composite structures using acoustic emission. Presented at: International Conference on Computational and Experimental Engineering Sciences Phuket, Thailand
• Featherston, C. A. , Holford, K. M. and Greaves, B. 2009. Harvesting Vibration Energy for Structural Health Monitoring in Aircraft. Key Engineering Materials 413-41 , pp.439-446. (10.4028/www.scientific.net/KEM.413-414.439)
• Featherston, C. A. , Holford, K. M. and Waring, G. 2009. Thermoelectric Energy Harvesting for Wireless Sensor Systems in Aircraft. Key Engineering Materials. 413-41 , pp.487-494. (10.4028/www.scientific.net/KEM.413-414.487)
• Hensman, J. et al., 2009. Detecting and Identifying Artificial Acoustic Emission Signals in an Industrial Fatigue Environment. Measurement Science and Technology 20 (4) 045101. (10.1088/0957-0233/20/4/045101)
• Holford, K. M. 2009. Acoustic Emission in Structural Health Monitoring. Key Engineering Materials. Damage Assessment of Structures VIII 413 - , pp.15-28. (10.4028/www.scientific.net/KEM.413-414.15)
• Holford, K. M. et al. 2009. Acoustic emission for monitoring aircraft structures. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 223 (5), pp.525-532. (10.1243/09544100JAERO404)

2008

• Pullin, R. et al. 2008. A principal component analysis of acoustic emission signals from a landing gear component. Presented at: 6th International Conference on Advances in Experimental Mechanics London, UK 9-10 September 2008. Published in: Dulieu-Barton, J. M. , Dennis Lord, J. and Greene, R. J. eds. Advances in experimental mechanics VI : selected peer reviewed papers from 6th International Conference on Advances in Experimental Mechanics, 9th-11th September 2008, National Physical Laboratory, London, UK. Trans Tech. , pp.41-47. (10.4028/www.scientific.net/AMM.13-14.41)
• Chaston, A. et al., 2008. Shear Wave Ultrasonic Coupling Performance of Different Adhesives. Insight - Non-Destructive Testing and Condition Monitoring 50 (11), pp.633-636. (10.1784/insi.2008.50.11.633)
• Eaton, M. J. et al. 2008. AE wave propagation and novel source location in composite plates. Presented at: 28th European Conference on Acoustic Emission Krakow, Poland
• Featherston, C. A. , Eaton, M. J. and Holford, K. M. 2008. Imperfection sensitivity in plates - An assessment using DIC, SEM XI. Presented at: SEM XI International Congress & Exposition on Experimental and Applied Mechanics Orlando, FL 2 - 5 June 2008.
• Hensman, J. et al., 2008. Detecting and Identifying Artificial Acoustic Emission Signals in an Industrial Fatigue Environment. Applied Mechanics and Materials: Advances in Experimental Mechanics VI 13-14 , pp.251-260. (10.4028/www.scientific.net/AMM.13-14.251)
• Lark, R. J. , Pullin, R. and Holford, K. M. 2008. Acoustic emission monitoring of concrete structures. Presented at: Onsite assessment of concrete, masonry and timber structures, International RILEM Conference (SACoMaTiS 2008) Varenna, Italy
• Pullin, R. et al. 2008. Acoustic emission monitoring of bridge structures in the field and laboratory. Presented at: 28th European Conference on Acoustic Emission Krakow, Poland
• Pullin, R. et al. 2008. Acoustic emission monitoring of bridge structures in the field and laboratory. Journal of Acoustic Emission 26 , pp.172-181.

2007

• Baxter, G. et al. 2007. Delta T source location for acoustic emission. Mechanical systems and signal processing 21 (3), pp.1512-1520. (10.1016/j.ymssp.2006.05.003)
• Bunnori, N. M. , Holford, K. M. and Lark, R. J. 2007. Acoustic emission monitoring of concrete structures suffering from reinforcement corrosion. Concrete 41 (1), pp.25-27.
• Eaton, M. J. et al. 2007. An investigation of frequency as an acoustic emission signal discriminator in carbon fibre composite materials. Presented at: 6th International Conference on Acoustic Emission, (ICAE6) Lake Tahoe, Nevada, USA, pp.312-217.
• Eaton, M. J. et al. 2007. Damage in carbon fibre composites: the discrimination of acoustic emission signals using frequency. Journal of Acoustic Emission 25 , pp.140-148.
• Holford, K. M. , Pullin, R. and M., B. 2007. Current practice and applications of acoustic emission. Presented at: 13th International Conference on Experimental Mechanics (ICEM 13) Alexandroupolis, Greece
• Nicholas, M. K. D. et al., 2007. Analysis of rhelogical properties of bone cement. Journal of Materials Science: Materials in Medicine 18 (7), pp.1407-1412. (10.1007/s10856-007-0125-2)
• Pullin, R. et al. 2007. Novel acoustic emission source detection. Journal of Acoustic Emission 25 , pp.215-223.
• Pullin, R. et al. 2007. Novel acoustic emission source detection. Presented at: 5th International Conference on Acoustic Emission Lake Tahoe, USA
• Pullin, R. et al. 2007. Principal component analysis of acoustic emission signals from a landing gear component. Key Engineering Materials 347 , pp.139-144.
• Pullin, R. et al. 2007. Advanced location and characterisation of damage in complex metallic structures using acoustic emission. Presented at: 13th International Conference on Experimental Mechanics (ICEM07) Alexandroupolis, Greece
• Pullin, R. , Holford, K. M. and Evans, S. L. 2007. Confidence of detection of fracture signals using acoustic emission. Presented at: 5th International Conference on Advances in Experimental Mechanics, Manchester Manchester, UK
• Pullin, R. , Holford, K. M. and Evans, S. L. 2007. Confidence of detection of fractures using acoustic emission signals. Applied Mechanics and Materials 07-08 , pp.147-152. (10.4028/www.scientific.net/AMM.7-8.147)
• Pullin, R. et al. 2007. A Numerical Determination of Acoustic Emission Sensor Response in Plates Using Dispersion Curves. Key Engineering Materials 347 , pp.381-386. (10.4028/www.scientific.net/KEM.347.381)
• Pullin, R. et al. 2007. Numerical determination of acoustic emission sensor response in plates using dispersion curves. Presented at: 7th International Conference on Damage Assessment of Structures (DAMAS 2007) Turin, Italy

2006

• Bunnori, N. M. , Holford, K. M. and Lark, R. J. 2006. The application of acoustic emission monitoring of concrete structures suffering from reinforcement corrosion. Presented at: Concrete Communication Conference, University College London London, UK
• Eaton, M. J. et al. 2006. Acoustic emission monitoring of delamination defects inbuckling CFRP composite panels. Advanced Materials Research 13-14 , pp.259-266. (10.4028/www.scientific.net/AMR.13-14.259)
• Holford, K. M. 2006. Advice notes on the Non-Destructive Testing of highway structures. Technical Report.
• Muhamad Bunnori, N. et al., 2006. A practical investigation into acoustic wave propagation in concrete structures. Advanced Materials Research 13-14 , pp.205-212. (10.4028/www.scientific.net/AMR.13-14.205)
• Pullin, R. et al. 2006. Acoustic emission testing of a landing gear component. Advanced Materials Research 13-14 , pp.29-34. (10.4028/www.scientific.net/AMR.13-14.29)
• Pullin, R. et al. 2006. Experimental validation of dispersion curves in plates for acoustic emission. Advanced Materials Research 13-14 , pp.53-60. (10.4028/www.scientific.net/AMR.13-14.53)

2005

• Ostachowicz, W. M. et al., 2005. Damage assessment of structures VI. Key Engineering Materials Vol. 293-39Trans Tech Publications.
• Baxter, M. G. et al., 2005. Detection of fatigue crack growth in aircraft landing gear, 4 point bend specimens. Key Engineering Materials 293-94 , pp.193 -200. (10.4028/www.scientific.net/KEM.293-294.193)
• Eaton, M. J. et al. 2005. Buckling and postbuckling of impact damaged composite plates. Presented at: SEM Annual Conference Portland, USA
• Featherston, C. A. et al. 2005. Measuring the torsional stiffness of a space frame chassis using 3D motion capture techniques. Presented at: 4th International Conference on Advances in Experimental Mechanics Southampton, UK 6-8 September 2005. Published in: Dulieu-Barton, J. M. and Quinn, S. eds. Advances in experimental mechanics IV : proceedings of the 4th International Conference on Advances in Experimental Mechanics. Vol. 3-4.London: Trans-Tech Publications. , pp.423-428.
• Holford, K. M. and Lark, R. J. 2005. Acoustic emission testing of bridges. In: Fu, G. ed. Inspection and Monitoring Techniques for Bridges and Civil Structures. Cambridge: Woodhead Publishing. , pp.183-215.
• Holford, K. M. and Worden, K. 2005. Special issue on acoustic emission [Editorial]. Journal of Strain Analysis for Engineering Design 40 (1), pp.i-iii. (10.1177/030932470504000101)
• Pullin, R. , Holford, K. M. and Baxter, M. G. 2005. Modal analysis of acoustic emission signals from artificial and fatigue crack sources in aerospace grade steel. Key Engineering Materials 293-29 , pp.217-224. (10.4028/www.scientific.net/KEM.293-294.217)
• Watton, J. and Holford, K. M. 2005. Industrial digital control in undergraduate fluid power courses: a student-centred approach using an active suspension test rig. Australian Journal of Mechanical Engineering 2 (2), pp.117-124.

2004

• Baxter, M. G. , Pullin, R. and Holford, K. M. 2004. Detection of fatigue cracks in aircraft landing gear. Presented at: 26th European Conference on Acoustic Emission Testing Berlin, Germany, pp.331-341.
• Holford, K. M. et al. 2004. Acoustic emission monitoring of buckling behaviour in impact-damaged composite plates. Presented at: 26th European Conference on Acoustic Emission Testing Berlin, Germany, pp.427-434.
• Holford, K. M. , Pullin, R. and Lark, R. J. 2004. Acoustic emission modelling of concrete hinge joint models. Journal of Acoustic Emission 22 , pp.166-172.
• Pullin, R. , Holford, K. M. and Lark, R. J. 2004. An investigation of the use of acoustic emission to monitor hinge joints. Project Report.
• Pullin, R. , Holford, K. M. and Lark, R. J. 2004. Christchurch Hill (Royal Oak) Overbridge: an investigation of the use of acoustic emission to monitor the behaviour of the thrust hinges. Project Report.
• Watton, J. , Holford, K. M. and Surawattanawan, P. 2004. The application of a programmable servo controller to state control of an electrohydraulic active suspension. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 218 (12), pp.1367-1377. (10.1243/0954407042707650)

2003

• Dulieu-Barton, J. M. et al., 2003. Damage assessment of structures V: DAMAS 2003. Key Engineering Materials Zurich: Trans Tech Publications.
• Beck, P. et al., 2003. A quantitative study of the relationship between concrete crack parameters and acoustic emission energy released during failure. Key Engineering Materials 245-24 , pp.462-466. (10.4028/www.scientific.net/KEM.245-246.461)
• Beck, P. , Lark, R. J. and Holford, K. M. 2003. Moment tensor analysis of acoustic emission in concrete specimens failed in four-point bending. Key Engineering Materials 245-46 , pp.443-450. (10.4028/www.scientific.net/KEM.245-246.443)
• Evans, S. L. et al. 2003. Problems in the fatigue testing of PMMA bone cements. Presented at: Proceedings of the 2nd International Conference on New Biomedical Materials Cardiff, UK
• Holford, K. M. , Pullin, R. and Davies, A. W. 2003. Damage location by acoustic emission techniques. Presented at: 3rd International Conference on Identification in engineering systems Swansea, UK April 2002. Published in: Lees, A. W. , Prells, U. and Norton, J. P. eds. Identification in engineering systems : proceedings of the third international conference held in Swansea, April 2002. Swansea: University of Swansea. , pp.198-207.
• Pullin, R. et al. 2003. Acoustic emission assessment of concrete hinge joints. Key Engineering Materials 245-24 , pp.323-330.
• Rippengill, S. et al., 2003. Automatic classification of acoustic emission patterns. STRAIN 39 (1), pp.31-41. (10.1046/j.1475-1305.2003.00041.x)
• Watton, J. and Holford, K. M. 2003. Industrial digital control in undergraduate fluid power course: a student-centered approach using an active suspension test rig. Presented at: Ist International Conference on Computational Methods in Fluid Power Systems Melbourne, Australia, pp.535-542.

2002

• Bradshaw, T. et al., 2002. Ball bearing calibration of concrete structures using AE. Presented at: 25th European Conference on Acoustic Emission Testing EWGAE Prague, Czech RepublicVol. 1. , pp.91-98.
• Pullin, R. and Holford, K. M. 2002. Single sensor source location of AE from fatigue cracks. Presented at: 25th European Conference on Acoustic Emission Testing EWGAE Prague, Czech RepublicVol. 11. , pp.95-102.

2001

• Watton, J. , Holford, K. M. and Surawattanawan, P. 2001. Electrohydraulic effects on the modelling of a vehicle active suspension. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 215 (10), pp.1077-1092. (10.1243/0954407011528635)
• Holford, K. M. et al. 2001. Damage location in steel bridges by acoustic emission. Journal of Intelligent Material Systems and Structures 12 (8), pp.567-576. (10.1177/10453890122145311)
• Holford, K. M. et al. 2001. Visualisation and dimension reduction of acoustic emission data for damage detection. Journal of Intelligent Material Systems and Structures 12 (8), pp.529-536. (10.1177/10453890122145375)
• Holford, K. M. et al. 2001. Damage assessment of structures IV: DAMAS 2001. Key Engineering Materials Vol. 204-5Zurich: Trans Tech Publications.
• Staszewski, W. J. and Holford, K. M. 2001. Wavelet signal processing of acoustic emission data. Key Engineering Materials 204-20 , pp.351-358. (10.4028/www.scientific.net/KEM.204-205.351)
• Watson, J. R. et al., 2001. Damage assessment using acoustic emission. Key Engineering Materials 204/05 , pp.309-318. (10.4028/www.scientific.net/KEM.204-205.309)

1999

• Holford, K. M. and Carter, D. C. 1999. Acoustic emission source location. Presented at: International Conference on Damage Assessment of Structures (DAMAS 99) Dublin, Ireland 28-30 June 1999. Published in: Gilchrist, M. D. , Dulieu-Barton, J. M. and Worden, K. eds. Damage Assessment of Structures. Key Engineering Materials Vol. 167/68. Durnten-Zurich: Trans Tech Publications. , pp.162-171.
• Pullin, R. , Carter, D. C. and Holford, K. M. 1999. Damage assessment in steel bridges. Presented at: International Conference on Damage Assessment of Structures (DAMAS 99) Dublin, Ireland 28-30 June 1999. Published in: Gilchrist, M. D. , Dulieu-Barton, J. M. and Worden, K. eds. Damage Assessment of Structures. Key Engineering Materials Vol. 167/68. Durnten-Zurich: Trans Tech Publications. , pp.335-342.

1998

• Carter, D. C. and Holford, K. M. 1998. Strategic considerations for the AE monitoring of bridges: a discussion and case study. Insight - Non-Destructive Testing and Condition Monitoring 40 (2), pp.112-116.