Dr Anthony Giles

2026

• Giles, A. et al. 2026. Operability study with spatial resolved temperature and water molar concentration measurements of a new pressurised optical modular staged combustor. Journal of Engineering for Gas Turbines and Power 148 (3) 031010. (10.1115/1.4069603)
• Vivoli, R. et al. 2026. Surface roughness effects on the operability and performance of a hydrogen jet burner. Journal of Engineering for Gas Turbines and Power 148 (1) 011014. (10.1115/1.4069474)

2025

• Giles, A. et al. 2025. Operability study with spatial resolved temperature and water molar concentration measurements of a new pressurised optical modular staged combustor. Presented at: ASME Turbo Expo 2025: Turbomachinery Technical Conference and Exposition Memphis, Tennessee, USA 16-20 June 2025. Proceedings of the Turbomachinery Technical Conference and Exposition. Vol. 3A.Combustion, Fuels & Emissions American Society of Mechanical Engineers. (10.1115/gt2025-152180)
• Hewlett, S. et al. 2025. The effects of secondary air staging location, pressure and humidification on NOx emissions for a high ammonia blend in premixed swirl combustion. Presented at: ASME Turbo Expo 2025: Turbomachinery Technical Conference and Exposition Memphis, Tennessee, USA 16-20 June 2025. Proceedings of the Turbomachinery Technical Conference and Exposition. Vol. 2.Coal, Biomass, Hydrogen & Alternative Fuels American Society of Mechanical Engineers(10.1115/gt2025-151612)
• Vivoli, R. et al. 2025. Surface roughness effects on the operability and performance of a hydrogen jet burner. Presented at: ASME Turbo Expo 2025: Turbomachinery Technical Conference and Exposition Memphis, Tennessee, USA 16-20 June 2025. Proceedings of the Turbomachinery Technical Conference and Exposition. Vol. 3A.Combustion, Fuels & Emissions American Society of Mechanical Engineers. (10.1115/gt2025-151389)
• Weller, L. et al., 2025. Laser induced grating spectroscopy measurements of temperature and water vapour in turbulent lean premixed methane-hydrogen-air flames at pressure. Applied Physics B: Lasers and Optics 131 (11) 201. (10.1007/s00340-025-08573-1)

2024

• Chaib, O. et al., 2024. Spatial temperature measurements in a swirl-stabilized hydrogen-air diffusion flame at elevated pressure using laser-induced grating spectroscopy. Journal of Engineering for Gas Turbines and Power 146 (11) 111020. (10.1115/1.4065996)
• Giles, A. P. et al. 2024. Ammonia sprays for combustion: a review. Johnson Matthey Technology Review 68 (4), pp.530-548. (10.1595/205651324X17073140270956)
• Pugh, D. et al. 2024. Influence of variable swirl on emissions in a non-premixed fuel-flexible burner at elevated ambient conditions. Journal of Engineering for Gas Turbines and Power 146 (6) 061006. (10.1115/1.4063786)

2023

• Agwu, O. et al. 2023. Dual phase renewable fuel combustion in an atmospheric gas turbine burner. Journal of Thermal Science 32 , pp.1278-1291. (10.1007/s11630-023-1719-9)
• Mashruk, S. et al. 2023. Numerical analysis on the evolution of NH2 in ammonia/hydrogen swirling flames and detailed sensitivity analysis under elevated conditions. Combustion Science and Technology 195 (6), pp.1251-1278. (10.1080/00102202.2021.1990897)
• Pugh, D. et al. 2023. Influence of variable swirl on emissions in a non-premixed fuel-flexible burner at elevated ambient conditions. Presented at: ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition 26-30 June 2023. ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition: Combustion, Fuels, and Emissions. Vol. 3A.ASME. (10.1115/GT2023-102457)
• Weller, L. et al., 2023. Spatial temperature and water molar concentration measurements using thermal and electrostrictive ligs during operation of a swirl burner at pressure. Journal of Engineering for Gas Turbines and Power 146 (5) 051021. (10.1115/1.4063865)
• Weller, L. et al., 2023. Spatial temperature and water molar concentration measurements using thermal and electrostrictive LIGS during operation of a swirl burner at pressure. Presented at: ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition 26-30 June 2023. Turbo Expo: Power for Land, Sea and Air. Vol. 4.ASME. (10.1115/GT2023-101185)

2021

• Giles, A. et al. 2021. A waste heat recovery strategy and its deployment: an integrated steelworks case study. Proceedings of the ICE - Waste and Resource Management 174 (1), pp.3-11. (10.1680/jwarm.20.00011)
• Hewlett, S. G. et al. 2021. Industrial wastewater as an enabler of green ammonia to power via gas turbine technology. Presented at: Turbomachinery Technical Conference & Exposition (TURBO EXPO 2020) Virtual 21-25 September 2020. Proceedings of ASME Turbo Expo 2020 Turbomachinery Technical Conference and Exposition. ASME. , pp.GT2020-14581. (10.1115/GT2020-14581)
• Jones, T. et al. 2021. The potential transmission of COVID-19 during routine dental surgery. Presented at: 8th UK–China International Particle Technology Forum 2021 Dali, Tunnan, China 9-13 July 2021.
• Pugh, D. et al. 2021. Emissions performance of staged premixed and diffusion combustor concepts for an NH3/air flame with and without reactant humidification. Presented at: ASME Turbo Expo 2020: Turbomachinery Technical Conference & Exposition Virtual 21-25 September 2020. ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition. Vol. 4A.ASME. (10.1115/GT2020-14953)
• Pugh, D. et al. 2021. Emissions performance of staged premixed and diffusion combustor concepts for an NH3/air flame with and without reactant humidification. Journal of Engineering for Gas Turbines and Power 143 (5) 051012. (10.1115/1.4049451)
• Pugh, D. et al. 2021. An investigation of ammonia primary flame combustor concepts for emissions reduction with OH*, NH2* and NH* chemiluminescence at elevated conditions. Proceedings of the Combustion Institute 38 (4), pp.6451-6459. (10.1016/j.proci.2020.06.310)
• Runyon, J. et al. 2021. Experimental and kinetic evaluation of pressurized lean premixed hydrogen-air flame stability with carbon dioxide and steam dilution. Presented at: ASME Turbo Expo 2020: Turbomachinery Technical Conference & Exposition Virtual 21-25 September 2020. Proceedings of ASME Turbo Expo 2020Turbomachinery Technical Conference and Exposition. Vol. 4B.ASME. (10.1115/GT2020-16083)

2020

• Agwu, O. et al. 2020. Visualisation and performance evaluation of biodiesel/methane co-combustion in a swirl-stabilised gas turbine combustor. Fuel 277 118172. (10.1016/j.fuel.2020.118172)
• Runyon, J. et al. 2020. Characterization of Additive Layer Manufacturing Swirl Burner Surface Roughness and Its Effects on Flame Stability Using High-Speed Diagnostics.. Journal of Engineering for Gas Turbines and Power 142 (4) 041017. (10.1115/1.4044950)

2019

• Pugh, D. et al. 2019. Influence of steam addition and elevated ambient conditions on NOx reduction in a staged premixed swirling NH3/H2 flame. Proceedings of the Combustion Institute 37 (4), pp.5401-5409. (10.1016/j.proci.2018.07.091)
• Runyon, J. et al. 2019. Characterization of ALM swirl burner surface roughness and its effect on flame stability using high-speed diagnostics. Presented at: ASME Turbo Expo 2019 Phoenix, Arizona, USA 17-21 June 2019. ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition: Volume 4A: Combustion, Fuels, and Emissions. , pp.GT2019-90215-V04AT04A008. (10.1115/GT2019-90215)
• Valera Medina, A. et al. 2019. Premixed ammonia/hydrogen swirl combustion under rich fuel conditions for gas turbines operation. International Journal of Hydrogen Energy 44 (16), pp.8615-8626. (10.1016/j.ijhydene.2019.02.041)

2018

• Pugh, D. et al. 2018. Catalytic influence of water vapor on lean blowoff and NOx reduction for pressurised swirling syngas flames. Journal of Engineering for Gas Turbines and Power 140 (6) 061502. (10.1115/1.4038417)
• Runyon, J. et al. 2018. Lean methane flame stability in a premixed generic swirl burner: Isothermal flow and atmospheric combustion characterization. Experimental Thermal and Fluid Science 92 , pp.125-140. (10.1016/j.expthermflusci.2017.11.019)
• Valera-Medina, A. et al. 2018. Investigation of combustion of emulated biogas in a gas turbine test rig. Journal of Thermal Science 27 (4), pp.331-340. (10.1007/s11630-018-1024-1)

2017

• Buffi, M. et al., 2017. Emissions characterization tests for hydrotreated renewable jet fuel from used cooking oil and its blends. Applied Energy 201 , pp.84-93. (10.1016/j.apenergy.2017.05.104)
• Giles, A. P. et al. 2017. On flammability hazards from pressurised high-flashpoint liquid releases. Journal of Loss Prevention in the Process Industries 46 , pp.185-194. (10.1016/j.jlp.2017.01.024)
• Pugh, D. G. et al. 2017. Dissociative influence of H2O vapour/spray on lean blowoff and NOx reduction for heavily carbonaceous syngas swirling flames. Combustion and Flame 177 , pp.37-48. (10.1016/j.combustflame.2016.11.010)
• Pugh, D. et al. 2017. Catalytic influence of water vapor on lean blowoff and NOx reduction for pressurised swirling syngas flames. Presented at: ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition North Carolina, USA 26-30 June 2017. Volume 4B: Combustion, Fuels and Emissions. ASME. , pp.V04BT04A033. (10.1115/GT2017-64609)
• Runyon, J. et al. 2017. Experimental analysis of confinement and swirl effects on premixed ch4-h-2 flame behavior in a pressurized generic swirl burner. Presented at: ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition North Carolina, USA 26-30 June 2017. ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition. Vol. 4B.ASME. (10.1115/GT2017-64794)

2016

• Buffi, M. et al., 2016. Evaluation of combustion behavior of renewable jet fuel in a combustor rig: influence of HEFA and its blends on flame stability and emissions compared to aviation kerosene. Presented at: 24th European Biomass Conference Amsterdam, The Netherlands 6-9 June 2016.
• Gant, S. et al., 2016. Area classification of flammable mists: Summary of joint-industry project findings. Presented at: Hazards 26 Edinburgh, United Kingdom 24-26 May 2016. 26th Institution of Chemical Engineers Symposium on Hazards 2016 (HAZARDS 26). Institution of Chemical Engineers Symposium Series Vol. 161. Rugby, UK: Institution of Chemical Engineers. , pp.346-357.
• Giles, A. P. et al. 2016. Applicability of the Peclet number approach to blow-off and flashback limits of common steelworks process gases. Fuel 182 , pp.531-540. (10.1016/j.fuel.2016.05.082)
• Kurji, H. et al. 2016. Combustion characteristics of biodiesel saturated with pyrolysis oil for power generation in gas turbines. Renewable Energy 99 , pp.443-451. (10.1016/j.renene.2016.07.036)
• Marsh, R. et al. 2016. Premixed methane oxycombustion in nitrogen and carbon dioxide atmospheres: measurement of operating limits, flame location and emissions. Proceedings of the Combustion Institute. Proceedings of the Combustion Institute 36 (3), pp.3949-3958. (10.1016/j.proci.2016.06.057)

2015

• Runyon, J. et al. 2015. Methane-oxygen flame stability in a generic premixed gas turbine swirl combustor at varying thermal power and pressure. Presented at: ASME Turbo Expo 2015: Turbine Technical Conference and Exposition Montreal, Quebec, Canada 15–19 June 2015. Conference Proceedings of ASME Turbo Expo 2015: Turbine Technical Conference and Exposition. Vol. 4B.Combustion, Fuels and Emissions New York: ASME(10.1115/GT2015-43588)

2014

• Giles, A. et al. 2014. Explosive area classification for involatile liquid fuels: a replacement to flashpoint categorisation. Presented at: 26th European Conference Liquid Atomization & Spray Systems Bremen, Germany 8-10 September 2014.
• Syred, N. et al. 2014. Effect of inlet and outlet configurations on blow-off and flashback with premixed combustion for methane and a high hydrogen content fuel in a generic swirl burner. Applied Energy 116 , pp.288-296. (10.1016/j.apenergy.2013.11.071)

2013

• Pugh, D. et al. 2013. Thermal distributive blast furnace gas characterisation, a steelworks case study. Applied Thermal Engineering 53 (2), pp.358-365. (10.1016/j.applthermaleng.2012.05.014)
• Syred, N. et al. 2013. Effect of inlet and outlet configurations on blow-off and flashback with premixed combustion for high hydrogen content fuels in a generic swirl burner. Presented at: ICAE 2013 Pretoria, South Africa 12-15 November 2013.
• Syred, N. et al. 2013. Tangential Velocity Effects and Correlations for Blowoff and Flashback in a Generic Swirl Burner and the Effect of a Hydrogen Containing Fuel. Presented at: 51st AIAA Aerospace Science Meeting Texas, USA 7-10 January 2013. (10.2514/6.2013-736)
• Valera Medina, A. et al. 2013. Influence of the central recirculation zone strength in the blow off mechanism using different fuels. Presented at: European Combustion Meeting (ECM2013) Lund, Sweden 25-28 June 2013.
• Williams, C. et al. 2013. Utilising waste heat for steam generation within an integrated steelworks: A methodology for power generation and CO2 reduction. Presented at: 2013 ACEEE Summer Study on Energy Efficiency in Industry Niagara Falls, NY, USA 23-26 July 2013.

2012

• Pugh, D. et al. 2012. Laminar burning velocity and Markstein length characterisation of compositionally dynamic blast furnace gas. Presented at: Turbo Expo 2012: Turbine Technical Conference and Exposition Copenhagen, Denmark 11-15 June 2012. ASME Turbo Expo 2012: Turbine Technical Conference and Exposition Volume 2: Combustion, Fuels and Emissions, Parts A and B. ASME. , pp.1257-1266. (10.1115/GT2012-69667)

2006

• Giles, A. P. 2006. Alternative fuels and technology for internal combustion engines. PhD Thesis , Cardiff University.