Professor Rhys Pullin

CEng, FIMechE

2026

• Jessel, T. et al. 2026. Monitoring the effect of runout on a Diamond-Coated Burrs’ wear progression with Acoustic Emission. Wear 584-58 206420. (10.1016/j.wear.2025.206420)

2025

• Alami, K. et al., 2025. Sound-induced vibrations as a potentially damaging risk to museum collections. Presented at: International Conference on Collection Care Valencia, Spain 1-3 December 2021. Published in: Perles-Icars, A. F. , Fuster-Lopez, L. and Bosco, E. eds. Collection Care. Springer Proceedings in Archaeology and Heritage Springer. , pp.107-177. (10.1007/978-3-031-85655-6_9)
• Gullapalli, A. et al. 2025. A cyberphysical structural health monitoring framework for threshold-free active signal detection and classification on the edge. Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems 8 (2) 021003. (10.1115/1.4066196)
• Gullapalli, A. et al. 2025. A model-informed approach to robust calibration of experimental guided wave modes with cyberphysical systems. Presented at: AIAA SCITECH 2025 Forum Orlando, Florida 6-10 January 2025. Proceedings AIAA SCITECH 2025 Forum. American Institute of Aeronautics and Astronautics, Inc. (10.2514/6.2025-1219)
• Liu, S. et al. 2025. Evaluating and mitigating GNSS NLOS effects for autonomous navigation in urban environments. Presented at: The 30th International Conference on Automation and Computing (ICAC 2025) Loughborough, UK 27-29 August 2025. Proceedings of the 30th International Conference on Automation and Computing. IEEE. , pp.1-6. (10.1109/ICAC65379.2025.11196430)
• Ning, Z. , Pullin, R. and Ji, Z. 2025. GBP-LOAM: Lidar odometry and mapping using Gaussian Belief Propagation. Presented at: The 30th International Conference on Automation and Computing (ICAC 2025) Loughborough, UK 27-29 August 2025. Proceedings of the 30th International Conference on Automation and Computing. IEEE. (10.1109/ICAC65379.2025.11196354)
• Wright, B. J. et al., 2025. A novel acoustic emission screwdriver reduces surgeons´ cancellous screw stripping rate - A biomechanical study. Clinical Biomechanics 123 106467. (10.1016/j.clinbiomech.2025.106467)
• Zhang, Y. et al., 2025. On-device fault diagnosis with augmented acoustic emission data: a case study on carbon fiber panels. IEEE Transactions on Instrumentation and Measurement 74 2534912. (10.1109/TIM.2025.3577849)

2024

• Atkinson, T. et al. 2024. Development of a semi-autonomous pulse and receive concrete inspection system. Presented at: 36th Conference of the European Working Group on Acoustic Emission Potsdam, Germany 18-20 September 2024. Vol. 29.Vol. 10. (10.58286/30247)
• Gullapalli, A. et al. 2024. Smart edge computing framework for in-line signal detection and classification. Presented at: 2024 51st Annual Review of Progress in Quantitative Nondestructive Evaluation Denver, CO, USA 21-24 July 2024. Proceedings of the 2024 51st Annual Review of Progress in Quantitative Nondestructive Evaluation. ASME. (10.1115/QNDE2024-138485)
• Jessel, T. et al. 2024. Tool condition monitoring of diamond-coated burrs with acoustic emission utilising machine learning methods. International Journal of Advanced Manufacturing Technology 130 (3-4), pp.1107-1124. (10.1007/s00170-023-12700-7)
• Jessel, T. et al. 2024. The capability of Acoustic Emission features to monitor diamond-coated burr grinding wear and effectiveness. e-Journal of Nondestructive Testing 29 (10)(10.58286/30231)

2023

• da Silva Henriques, B. et al., 2023. Non-linear dynamics of a stiffened composite laminated panel with debonds. Composite Structures 321 117233. (10.1016/j.compstruct.2023.117233)
• Fisher, B. , Eaton, M. and Pullin, R. 2023. A novel multi-scale modelling approach to predict the reduction of transverse strength due to porosity in composite materials. Composite Structures 312 116861. (10.1016/j.compstruct.2023.116861)
• Potts, M. R. et al. 2023. An analysis of the relationship between microneedle spacing, needle force and skin strain during the indentation phase prior to skin penetration. Computer Methods in Biomechanics and Biomedical Engineering 26 (14), pp.1719-1731. (10.1080/10255842.2022.2136486)

2022

• Almudaihesh, F. et al. 2022. A comparison study of water diffusion in unidirectional and 2D woven carbon/epoxy composites. Polymer Composites 43 (1), pp.118-129. (10.1002/pc.26361)
• Grigg, S. , Pullin, R. and Featherston, C. 2022. Acoustic emission source location in complex aircraft structures using three closely spaced sensors. Mechanical Systems and Signal Processing 164 108256. (10.1016/j.ymssp.2021.108256)
• Grigg, S. et al. 2022. Wireless acoustic emission systems. In: Grosse, C. U. et al., Acoustic Emission Testing: Basics for Research – Applications in Engineering. Springer Tracts in Civil Engineering Springer, Cham. , pp.711-729. (10.1007/978-3-030-67936-1_23)
• McCrory, J. P. et al. 2022. Acoustic emission monitoring of metals. In: Grosse, C. U. et al., Acoustic Emission Testing: Basics for Research – Applications in Engineering. Springer. , pp.529-565. (10.1007/978-3-030-67936-1_18)
• Naaman, M. et al. 2022. Evaluating the usefulness of audible acoustics as a damage detection method in large composite structures. Presented at: European Workshop on Structural Health Monitoring 2022 Palermo, Italy 4-7 July 2022. Published in: Rizzo, P. and Milazzo, A. eds. Lecture Notes in Civil Engineering. Vol. 270.Cham: Springer. , pp.849–861. (10.1007/978-3-031-07322-9_86)
• Purcell, F. A. et al. 2022. Lamb wave mode spectroscopy on complex structures with amplitude-based feature detection. NDT and E International: Independent Nondestructive Testing and Evaluation 130 102649. (10.1016/j.ndteint.2022.102649)

2021

• Almudaihesh, F. et al. 2021. Understanding the role of graphene on the moisture absorption in graphene/polymer nanocomposites. IOP Conference Series: Materials Science and Engineering 1024 (1) 012006. (10.1088/1757-899X/1024/1/012006)
• Almudaihesh, F. et al. 2021. An assessment of the effect of progressive water absorption on the interlaminar strength of unidirectional carbon/epoxy composites using acoustic emission. Sensors 21 (13) 4351. (10.3390/s21134351)
• Grigg, S. et al. 2021. Impact monitoring of CFRP composites with acoustic emission and laser Doppler vibrometry. Engineering Research Express 3 (1) 015012. (10.1088/2631-8695/abde8b)
• Grigg, S. , Wright, B. J. and Pullin, R. 2021. A comparison of acoustic emission in cadaveric specimens and artificial sawbones during surgical screw implants. Presented at: World Conference on Acoustic Emission 2019 (WCAE) Guangdong, China 5-8 November 2019. Advances in Acoustic Emission Technology: Proceedings of the World Conference on Acoustic Emission—2019. Vol. 259.Advances in Acoustic Emission Technology Springer; 1999(10.1007/978-981-15-9837-1_49)
• Grigg, S. et al. 2021. Acoustic sensing and noise identification of a heating, ventilation and air conditioning unit: industrial case study. Applied Sciences 11 (21) 9811. (10.3390/app11219811)
• Grigg, S. et al. 2021. Advanced acoustic emission source location in aircraft structural testing. Presented at: 10th EASN Virtual Conference on Innovation in Aviation & Space to the Satisfaction of the European Citizens (EASN 2020) Virtual (Salerno, Italy) 2-5 September 2020. Vol. 1024.IOP Publishing: Conference Series / IOP Publishing. , pp.012029. (10.1088/1757-899X/1024/1/012029)
• Grigg, S. et al. 2021. Development of a low-power wireless acoustic emission sensor node for aerospace applications. Structural Control and Health Monitoring 28 (4) e2701. (10.1002/stc.2701)
• Pullin, R. et al. 2021. Equivalent biaxial strain evaluation in small punch testing using acoustic emission. Journal of Strain Analysis for Engineering Design 56 (3), pp.173-180. (10.1177/0309324720944067)
• Revill, P. et al. 2021. Acoustic emission monitoring of wear in aerospace self-lubricating bearing liner materials. Wear 486-48 204102. (10.1016/j.wear.2021.204102)
• Sause, M. G. R. , Jasiūnienė, E. and Pullin, R. 2021. Introduction. In: Sause, M. and Jasiūnienė, E. eds. Structural Health Monitoring Damage Detection Systems for Aerospace. Springer Aerospace Technology book series (SAT) Springer, Cham.. , pp.1-4. (10.1007/978-3-030-72192-3_1)
• Wang, Y. et al. 2021. Detection and evaluation of vascular network based self-healing concrete using acoustic emission. Presented at: World Conference on Acoustic Emission 2019 (WCAE) Guangdong, China 5-8 November 2019. Published in: Shen, G. , Zhang, J. and Wu, Z. eds. Advances in Acoustic Emission Technology: Proceedings of the World Conference on Acoustic Emission—2019. Vol. 259.Springer Proceedings in Physics Springer; 1999. (10.1007/978-981-15-9837-1_25)
• Zabek, D. et al. 2021. Piezoelectric-silicone structure for vibration energy harvesting: testing and modelling. Smart Materials and Structures 30 (3) 035002. (10.1088/1361-665X/abd964)

2020

• Almudaihesh, F. et al. 2020. The influence of water absorption on unidirectional and 2D woven CFRP composites and their mechanical performance. Composites Part B: Engineering 182 107626. (10.1016/j.compositesb.2019.107626)
• Marks, R. et al., 2020. Development of an automated assessment technology for detecting damage in body armour. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 234 , pp.4116-4125. (10.1177/0954406220919454)
• McCrory, J. P. et al. 2020. Optimisation of acoustic emission wavestreaming for structural health monitoring. Structural Health Monitoring 19 (6), pp.2007-2022. (10.1177/1475921720912174)
• Pearson, M. et al. 2020. Optimized placement of parasitic vibration energy harvesters for autonomous structural health monitoring. Journal of Intelligent Material Systems and Structures 31 (11), pp.1403-1415. (10.1177/1045389X20922907)
• Purcell, F. et al. 2020. Non-destructive evaluation of isotropic plate structures by means of mode filtering in the frequency-wavenumber domain. Mechanical Systems and Signal Processing 142 106801. (10.1016/j.ymssp.2020.106801)
• Wright, B. et al., 2020. Real time monitoring of screw insertion using acoustic emission can predict screw stripping in human cancellous bone. Clinical Biomechanics 76 105026. (10.1016/j.clinbiomech.2020.105026)

2019

• Almudaihesh, F. et al. 2019. The influence of water absorption on the damage mechanism of unidirectional and 2D woven CFRP.. Presented at: 22nd International Conference on Composite Materials (ICCM22 2019) Melbourne, Australia 11-16 August 2019. Proceedings of the 2019 International Conference on Compostie Materials. RMIT University
• Cernescu, A. and Pullin, R. 2019. New research findings on non-proportional low cycle fatigue. Presented at: 12th International Conference on Multiaxial Fatigue and Fracture (ICMFF12) Bordeaux, France 24-26 June 2019. Published in: Palin-Luc, T. , Morel, F. and Carpinteri, A. eds. Vol. 300., pp.08003. (10.1051/matecconf/201930008003)
• Hutt, S. et al. 2019. The acoustic emission from asperity interactions in mixed lubrication. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences 475 (2227) 20180900. (10.1098/rspa.2018.0900)
• Hutt, S. M. et al. 2019. Characterising the acoustic emission from a simulated gear contact in mixed lubrication conditions. Presented at: 6th International Conference on Condition Monitoring of Machinery in Non-Stationary Operations Santander, Spain 20 - 22 June 2018. Published in: Fernandez Del Rincon, A. et al., Advances in Condition Monitoring of Machinery in Non-Stationary Operations: Proceedings of the 6th International Conference on Condition Monitoring of Machinery in Non-Stationary Operations, CMMNO’2018, 20-22 June 2018, Santander, Spain. Vol. 15.Applied Condition Monitoring Cham: Springer. , pp.400-408. (10.1007/978-3-030-11220-2_41)
• Sshrama, K. et al., 2019. On the use of acoustic emission and digital image correlation for welded joints damage characterization. Journal of Applied and Computational Mechanics 5 (2), pp.381-389. (10.22055/JACM.2018.25941.1301)

2018

• Al-Jumaili, S. K. et al. 2018. Characterisation of fatigue damage in composites using an Acoustic Emission Parameter Correction Technique. Composites Part B: Engineering 151 , pp.237-244. (10.1016/j.compositesb.2018.06.020)
• Almudaihesh, F. et al. 2018. The effects of fibre architecture on water absorption induced degradation in CFRP laminates.. Presented at: 18th European Conference on Composite Materials (ECCM 2018) Athens, Greece 24-28 June 2018. 18th European Conference on Composite Materials (ECCM-18). Applied Mechanics Laboratory.
• Clarke, A. et al. 2018. Damage detection in high performance gears using a magnetoelastic sensor to measure rate of change of torque. Presented at: Leeds-Lyon Symposium on Tribology Leeds 4-7 September 2018.
• Clarke, A. et al. 2018. On the use of Acoustic Emission as an aid to understanding of lubricated contacts in tribological systems. Presented at: 21st International Colloquium Tribology Esslingen 9th-11th January 2018.
• Crivelli, D. et al. 2018. Gear tooth root fatigue test monitoring with continuous acoustic emission: advanced signal processing techniques for detection of incipient failure. Structural Health Monitoring 17 (3), pp.423-433. (10.1177/1475921717700567)
• Pearson, M. , Pullin, R. and Szigeti, E. 2018. Audible acoustics for detecting and locating damage in composite structures. Presented at: 9th European Workshop on Structural Health Monitoring (EWSHM 2018) Manchester, U.K. 10-13 July 2018. 9th European Workshop on Structural Health Monitoring (EWSHM 2018).
• Pechon, P. H. M. et al., 2018. Acoustic emission technology can warn of impending iatrogenic femur fracture during femoral canal preparation for uncemented hip replacement. A cadaveric animal bone study. Journal of Medical Engineering and Technology 48 (2), pp.72-87. (10.1080/03091902.2017.1411986)

2017

• Al-Azzawi, A. S. M. et al. 2017. Buckling and postbuckling behaviour of glare laminates containing splices and doublers. Part 1: instrumented tests. Composite Structures 176 , pp.1158-1169. (10.1016/j.compstruct.2017.04.030)
• Griffiths, D. et al. 2017. Investigating the mechanical properties of case carburised steels. Presented at: BSS 12th International Conference on Advances in Experimental Mechanics Sheffield, UK 29 - 31 August 2017.
• Holford, K. M. et al. 2017. A new methodology for automating acoustic emission detection of metallic fatigue fractures in highly demanding aerospace environments: An overview. Progress in Aerospace Sciences 90 , pp.1-11. (10.1016/j.paerosci.2016.11.003)
• Hutt, S. et al. 2017. Use of acoustic emission to determine the lubrication conditions in simulated gear contacts. Presented at: BSSM 12th International Conference on Advances in Experimental Mechanics Sheffield, UK 29 - 31 August 2017.
• Karras, K. et al. 2017. Damage detection of a composite bearing liner using Acoustic Emission.. Presented at: BSSM 12th International Conference on Advances in Experimental Mechanics Sheffield, UK 21 - 31 August 2017.
• Kundu, A. et al. 2017. Acoustic emission based damage localization in composites structures using Bayesian identification. Journal of Physics. Conference Series 842 , pp.012081. (10.1088/1742-6596/842/1/012081)
• Liu, S. et al., 2017. Correlation between acoustic emission distribution and stress variation through the depth of RC beam cross sections. Construction and Building Materials 150 , pp.634-645. (10.1016/j.conbuildmat.2017.06.001)
• Marks, R. et al. 2017. Optimization of acousto-ultrasonic sensor networks using genetic algorithms based on experimental and numerical datasets. International Journal of Distributed Sensor Networks 13 (11)(10.1177/1550147717743702)
• Marks, R. et al. 2017. Damage detection in a composite wind turbine blade using 3D scanning laser vibrometry. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 231 (16), pp.3024-3041. (10.1177/0954406216679612)
• Pearson, M. R. et al. 2017. Improved acoustic emission source location during fatigue and impact events in metallic and composite structures. Structural Health Monitoring 16 (4), pp.382-399. (10.1177/1475921716672206)
• Pullin, R. et al. 2017. Feasibility of detecting orthopaedic screw overtightening using acoustic emission. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 231 (3), pp.213-221. 095441191668911. (10.1177/0954411916689112)
• Shahidan, S. et al., 2017. Active crack evaluation in concrete beams using statistical analysis of acoustic emission data. Insight - Non-Destructive Testing and Condition Monitoring 59 (1), pp.24-31. (10.1784/insi.2017.59.1.24)

2016

• Al-Jumaili, S. K. et al. 2016. Acoustic emission source location in complex structures using full automatic delta T mapping technique. Mechanical Systems and Signal Processing 72-73 , pp.513-524. (10.1016/j.ymssp.2015.11.026)
• Cockerill, A. et al. 2016. Determination of rolling element bearing condition via acoustic emission. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 230 (11), pp.1377-1388. (10.1177/1350650116638612)
• Crivelli, D. , Featherston, C. and Pullin, R. 2016. Energy harvesting for a self-powered compact structural health monitoring system based on acoustic emission. Presented at: 8th European Workshop On Structural Health Monitoring (EWSHM 2016) Bilbao, Spain 5-8 July 2016. 8th European Workshop On Structural Health Monitoring (EWSHM 2016).
• Crivelli, D. et al. 2016. Data reduction for Structural Health Monitoring based on Chebyshev moments and wavelet transforms. Presented at: 11th International Conference on Advances in Experimental Mechanics Exeter, United Kingdom 5- 7 September 2016.
• Crivelli, D. et al. 2016. Acoustic emission for assessment of impact and lightning damage to woven carbon fibre laminates. Presented at: 8th European Workshop On Structural Health Monitoring (EWSHM 2016) Bilbao, Spain 5-8 July 2016. 8th European Workshop On Structural Health Monitoring (EWSHM 2016).
• Karras, K. et al. 2016. Damage detection of a PTFE liner matrix composite through the use of acoustic emission. Presented at: British Society for Strain Measurement 11th International Conference on Advances in Experimental Mechanics Exeter, UK 5th - 7th September 2016.
• Marks, R. et al. 2016. Lamb wave interaction with adhesively bonded stiffeners and disbonds using 3D vibrometry. Applied Sciences 6 (1) 12. (10.3390/app6010012)
• Marks, R. et al. 2016. Virtual delta-t mapping technique using a local interaction simulation approach for location of Acoustic Emission damage events for aerospace applications. Presented at: British Society for Strain Measurement 11th International Conference on Advances in Experimental Mechanics Exeter, UK 5-7 September 2016.
• Marks, R. et al. 2016. Optimising an acoustic emission sensor network on a panel of complex geometry using a Local Interaction Simulation Approach. Presented at: British Society for Strain Measurement 11th International Conference on Advances in Experimental Mechanics University of Exeter, UK 5-7 September 2016.
• Wyatt, H. L. et al. 2016. Deformation during the electrosurgical vessel sealing process. Strain 52 , pp.372-379. (10.1111/str.12197)
• Wyatt, H. L. et al. 2016. Variation in electrosurgical vessel seal quality along the length of a porcine carotid artery. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 230 (3), pp.169-174. (10.1177/0954411915621092)

2015

• Al-Azzawi, A. et al. 2015. Buckling and postbuckling behaviour of glare laminates containing splices and doublers: experimental and numerical investigation. Presented at: 3rd International Conf erence on Buckling and Postbuckling Behaviour of Composite Laminated Structures Braunschweig, Germany 25-27 March 2015. , pp.S65-S65.
• Al-Jumaili, S. et al. 2015. Parameter Correction Technique (PCT): A novel method for acoustic emission characterisation in large-scale composites. Composites Part B: Engineering 75 , pp.336-344. (10.1016/j.compositesb.2015.01.044)
• Al-Jumaili, S. K. et al. 2015. Classification of acoustic emission data from buckling test of carbon fibre panel using unsupervised clustering techniques. Structural Health Monitoring 14 (3), pp.241-251. (10.1177/1475921714564640)
• Clarke, A. et al. 2015. A simultaneous testing facility for aerospace self-lubricated bearing liner materials. Presented at: STLE 70th Annual Meeting and Exhibition Dallas, Texas, USA 17-21 May 2015. , pp.206-224.
• Clarke, A. et al. 2015. Wear testing of aerospace self-lubricating bearing liner materials [Abstract]. Presented at: 42nd Leeds-Lyon Symposium on Tribology Lyon, France 7-9 September 2015. Proceedings of the 42nd Leeds-Lyon Symposium on Tribology. Lyon: , pp.1.
• Cockerill, A. et al. 2015. Acoustic emission as an aid to understanding raceway damage in rolling element bearings [Abstract]. Presented at: 42nd Leeds-Lyon Symposium on Tribology Lyon, France 7-9 September 2015. Proceedings of the 42nd Leeds-Lyon Symposium on Tribology. Lyon: , pp.1.
• Cockerill, A. et al. 2015. Use of high frequency analysis of acoustic emission signals to determine rolling element bearing condition. Journal of Physics. Conference Series 628 012074. (10.1088/1742-6596/628/1/012074)
• Crivelli, D. et al. 2015. Localisation and identification of fatigue matrix cracking and delamination in a carbon fibre panel by acoustic emission. Composites Part B: Engineering 74 , pp.1-12. (10.1016/j.compositesb.2014.12.032)
• Eaton, M. J. et al. 2015. Accurate damage location in complex composite structures and industrial environments using acoustic emission. Presented at: 11th International Conference on Damage Assessment of Structures (DAMAS 2015) Ghent, Belgium 24–26 August 2015. 11th International Conference on Damage Assessment of Structures (DAMAS 2015). Journal of Physics: Conference Series Vol. 628. , pp.012105.
• Grigg, S. et al. 2015. Assessment of damage detection in composite structures using 3D vibrometry. Journal of Physics: Conference Series 628 012101.
• Marks, R. et al. 2015. Sensor location studies for damage detection in aerospace structures using 3D scanning laser vibrometry. Presented at: 34th Conference and 28th Symposium of the International Committee on Aeronautical Fatigue and Structural Integrity Helsinki, Finland 1-5 June 2015. ICAF 2015 Structural Integrity: Embracing the Future - respecting the past; supporting aging fleets with new technologies - Proc. 34th Conf. & 28th Symposium of the International Committee on Aeronautical Fatigue & Structural Integrity.. Espoo, Finland: VTT Technical Research Centre of Finland Ltd. , pp.808-818.
• Marks, R. et al. 2015. Using genetic algorithms to optimize an active sensor network on a stiffened aerospace panel with 3D scanning laser vibrometry data. Journal of Physics: Conference Series 628 012116. (10.1088/1742-6596/628/1/012116)
• Marks, R. et al. 2015. Barely visible impact damage detection in a composite turbine blade using 3D Scanning Laser Vibrometery. Presented at: British Society for Strain Measurement Conference 2015 Heriot-Watt University, Edinburgh, UK 1-3 September 2015.
• McCrory, J. P. et al. 2015. Damage classification in carbon fibre composites using acoustic emission: A comparison of three techniques. Composites Part B: Engineering 68 , pp.424-430. (10.1016/j.compositesb.2014.08.046)
• Pearson, M. R. et al. 2015. Improved acoustic emission damage source location during fatigue testing of complex structures. In: Proceedings of the 34th Conference and the 28th Symposium of the International Committee on Aeronautical Fatigue and Structural Integrity. ICAF. , pp.846-853.
• Shrama, K. et al. 2015. Fatigue crack monitoring in mild steel specimens using acoustic emission and digital image correlation. Insight - Non Destructive Testing and Condition Monitoring 57 (6), pp.346-354. (10.1784/insi.2015.57.6.346)

2014

• Al-Azzawi, A. et al. 2014. Delamination characteristics of splices and doublers in glare laminates during buckling. Presented at: 11th World Congress on Computational Mechanics (WCCM XI) Barcelona,Spain 25 July 2014. , pp.S65-S65.
• Al-Jumaili, S. K. et al. 2014. Damage characterisation in composite materials under buckling test using acoustic emission waveform clustering technique. Presented at: The 53rd Annual Conference of The British Institute of Non-Destructive Testing Manchester, UK 9-11 September 2014.
• Al-Jumaili, S. K. et al. 2014. A Parameter Correction Technique (PCT) for acoustic emission characterisation in large-scale composites. Presented at: 31st European Conference on Acoustic Emission Testing (EWGAE) Dresden, Germany 3-5 September 2014. , pp.1-8.
• Cockerill, A. et al. 2014. Damage assessment of rolling element bearings using acoustic emission. Presented at: 16th International Workshop on Experimental Mechanics Cambridge, UK 7 - 11 July 2014.
• Crivelli, D. et al. 2014. Chebyshev descriptors for SHM with acoustic emission and acousto ultrasonics. International Journal of Structural Integrity 5 (3), pp.202-213. (10.1108/IJSI-04-2014-0013)
• Marks, R. et al. 2014. Optimisation of acoustic emission sensor positioning on aerospace structures using 3D scanning laser vibrometry. Presented at: 16th International Conference on Experimental Mechanics Cambridge, UK 7 - 11 July 2014.
• McCrory, J. et al. 2014. Automated corrected MAR calculation for characterisation of AE signals. Presented at: 31st European Conference on Acoustic Emission Testing (EWGAE) Dresden, Germany 3-5 September 2014.
• Pearson, M. R. et al. 2014. Airborne acoustic damage location for structural health monitoring applications. Presented at: ICEM 16 - 16th International Conference on Experimental Mechanics Cambridge, England 7-11 July 2014.
• Shrama, K. et al. 2014. Detection of cracking in mild steel fatigue specimens using acoustic emission and digital image correlation. Presented at: 32st Conference of the European Working Group on Acoustic Emission Dresden, Germany 3 -5 September 2014. Proceedings of 31st Conference of the European Working Group on Acoustic Emission (EWGAE).

2013

• Crivelli, D. et al. 2013. Classification of acoustic emission data from Buckling Test of carbon fiber panel using neural networks. Presented at: 3rd European Aeronautics Science Network Workshop on Aerostructures Milan, Italy 11 October 2013.
• Elfergani, H. A. , Pullin, R. and Holford, K. M. 2013. Damage assessment of corrosion in prestressed concrete by acoustic emission. Construction and Building Materials 40 , pp.925-933. (10.1016/j.conbuildmat.2012.11.071)
• Featherston, C. et al. 2013. An autonomous structural health monitoring solution. Presented at: Microtechnologies 2013 Grenoble, France 24-26 April 2013. Proc. SPIE 8763, Smart Sensors, Actuators, and MEMS VI. Society of Photo-Optical Instrumentation Engineers (SPIE). , pp.876302. (10.1117/12.2018401)
• Holford, K. M. et al. 2013. Approaches to acoustic emission monitoring with applicability to key components in wind turbines. Presented at: 9th International Workshop on Structural Health Monitoring Stanford, CA, USA 10-12 September 2013.
• Kural, A. et al. 2013. Design and characterization of an ultrasonic lamb-wave power delivery system. IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control 60 (6), pp.1134-1140. (10.1109/TUFFC.2013.2676)
• Pearson, M. et al. 2013. 9th international conference on advances in experimental mechanics. Presented at: 9th International Conference on Advances in Experimental Mechanics Cardiff, Wales 3 - 5 September 2013.
• Pearson, M. R. et al. 2013. Damage detection in composite materials using airborne acoustics. Key Engineering Materials 569-57 , pp.72-79. (10.4028/www.scientific.net/KEM.569-570.72)
• Pullin, R. et al. 2013. Automated damage detection in composite components using acoustic emission. Key Engineering Materials 569-57 , pp.80-87. (10.4028/www.scientific.net/KEM.569-570.80)
• Schmid, U. et al., 2013. Hybrid energy storage system for wireless sensor node powered by aircraft specific thermoelectric energy harvesting. Presented at: Smart Sensors, Actuators, and MEMS VI Grenoble, France 24 April 2013. Proc. SPIE 8763, Smart Sensors, Actuators, and MEMS VI. Vol. 8763.SPIE. , pp.876307. (10.1117/12.2017691)
• Shahidan, S. et al., 2013. Damage classification in reinforced concrete beam by acoustic emission signal analysis. Construction and Building Materials 45 , pp.78-85. (10.1016/j.conbuildmat.2013.03.095)
• Thangaraj, K. et al. 2013. Energy storage options for wireless sensors powered by aircraft specific thermoelectric energy harvester. Microsystem Technologies 20 (4-5), pp.701-707. (10.1007/s00542-013-2009-3)

2012

• Eaton, M. J. , Pullin, R. and Holford, K. M. 2012. Acoustic emission source location in composite materials using Delta T Mapping. Composites Part A: Applied Science and Manufacturing 43 (6), pp.856-863. (10.1016/j.compositesa.2012.01.023)
• Eaton, M. J. , Pullin, R. and Holford, K. M. 2012. Towards improved damage location using acoustic emission. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 226 (9), pp.2141-2153. (10.1177/0954406212449582)
• Pearson, M. R. et al. 2012. Energy Harvesting for Aerospace Structural Health Monitoring Systems. Journal of Physics. Conference Series 382 (1) 012025. (10.1088/1742-6596/382/1/012025)
• Pechon, P. et al., 2012. A novel sensor technology may be used to predict impending iatrogenic femur fracture during uncemented hip arthroplasty in real time. Original laboratory research using deer femora [Abstract]. Orthopaedic Proceedings : a supplement of Journal of Bone and Joint Surgery (British) 94-B (SXVIII), pp.52-52.
• Pullin, R. et al. 2012. Identification of the onset of cracking in gear teeth Using acoustic emission. Journal of Physics. Conference Series 382 (1) 012050. (10.1088/1742-6596/382/1/012050)
• Pullin, R. et al. 2012. Assessment of bonded patch bridge repairs using acoustic emission and acousto-ultrasonics. Key Engineering Materials 518 , pp.57-65. (10.4028/www.scientific.net/KEM.518.57)
• Pullin, R. et al. 2012. On the Development of a Damage Detection System using Macro-fibre Composite Sensors. Journal of Physics. Conference Series 382 (1) 012049. (10.1088/1742-6596/382/1/012049)
• Wood, O. et al. 2012. Optimised Vibration Energy Harvesting for Aerospace Applications. Key Engineering Materials 518 , pp.246-260. (10.4028/www.scientific.net/KEM.518.246)

2011

• Eaton, M. J. et al. 2011. Characterisation of Damage in Composite Structures using Acoustic Emission. Journal of Physics: Conference Series 305 (1) 012086. (10.1088/1742-6596/305/1/012086)
• Eaton, M. J. et al. 2011. Acoustic Emission Source Characterisation in Large-Scale Composite Structures. Applied Mechanics and Materials 70 , pp.381-386. (10.4028/www.scientific.net/AMM.70.381)
• Eaton, M. J. et al. 2011. Principal component analysis of acoustic emission signals from landing gear components: an aid to fatigue fracture detection. Strain 47 (Supp.1), pp.e588-e594. (10.1111/j.1475-1305.2009.00661.x)
• Elfergani, H. A. , Pullin, R. and Holford, K. M. 2011. Acoustic Emission Analysis of Prestressed Concrete Structures. Journal of Physics: Conference Series 305 (1) 012076. (10.1088/1742-6596/305/1/012076)
• Hensman, J. et al., 2011. Spatial scanning for anomaly detection in acoustic emission testing of an aerospace structure. Mechanical Systems and Signal Processing 25 (7), pp.2462-2474. (10.1016/j.ymssp.2011.02.016)
• Kural, A. et al. 2011. Wireless power transmission using ultrasonic guided waves. Journal of Physics. Conference Series 302 (1) 012088. (10.1088/1742-6596/305/1/012088)
• May, M. et al., 2011. An advanced model for initiation and propagation of damage under fatigue loading - part II: Matrix cracking validation cases. Composite Structures 93 (9), pp.2350-2357. (10.1016/j.compstruct.2011.03.023)
• Pearson, M. R. et al. 2011. Impact Damage Detection and Assessment in Composite Panels using Macro Fibre Composites Transducers. Journal of Physics: Conference Series 305 (1) 012049. (10.1088/1742-6596/305/1/012049)
• Wyatt, H. L. et al. 2011. Relationship of tissue composition on arterial tissue adhesion strength. Presented at: 24th European Conference on Biomaterials ESB2011 Dublin, Ireland 4-9 September 2011.

2010

• Featherston, C. A. et al. 2010. Development of a methodology to assess mechanical impulse effects resulting from lightning attachment to lightweight aircraft structure. Presented at: 7th BSSM International Conference on Advances in Experimental Mechanics Liverpool, UK 7 - 9 September.
• Featherston, C. A. et al. 2010. Development of a Methodology to Assess Mechanical Impulse Effects Resulting from Lightning Attachment to Lightweight Aircraft Structures. Applied Mechanics and Materials 24-25 , pp.129-134. (10.4028/www.scientific.net/AMM.24-25.129)
• Pullin, R. et al. 2010. Detection of cracking in gear teeth using Acoustic Emission. Applied Mechanics and Materials 24-25 , pp.45-50. (10.4028/www.scientific.net/AMM.24-25.45)
• Pullin, R. et al. 2010. Detection of cracking in gear teeth using acoustic emission. Presented at: 7th BSSM International Conference on Advances in Experimental Mechanics Liverpool, UK 7-9 September 2010.
• Pullin, R. et al. 2010. Validation of acoustic emission (AE) crack detection in aerospace grade steels using Digital Image Correlation (DIC). Presented at: 7th BSSM International Conference on Advances in Experimental Mechanics Liverpool, UK 7 - 9 September 2010. Published in: Mines, R. A. W. and Dulieu-Barton, J. M. eds. Advances in Experimental Mechanics. Applied Mechanics and Materials Vol. 24-25. Zurich: Trans Tech Publications. , pp.221-226. (10.4028/www.scientific.net/AMM.24-25.221)

2009

• Aljets, D. et al., 2009. Classification of delamination and matrix cracking in carbon fibre composite plates using Acoustic Emission (AE). Presented at: Proceedings of the ASME International Design Engineering Technical Conferences, and Computers and Information in Engineering Conference 2009 (DETC2009) San Diego, USAVol. 1., pp.29-36.
• Eaton, M. J. et al. 2009. Use of Macro Fibre Composite Transducers as Acoustic Emmission Sensors. Remote Sensing 1 (2), pp.68-79. (10.3390/rs1020068)
• Featherston, C. A. et al. 2009. Structural health monitoring of buckling composite structures using acoustic emission. Presented at: International Conference on Computational and Experimental Engineering Sciences Phuket, Thailand
• Hensman, J. et al., 2009. Detecting and Identifying Artificial Acoustic Emission Signals in an Industrial Fatigue Environment. Measurement Science and Technology 20 (4) 045101. (10.1088/0957-0233/20/4/045101)
• Holford, K. M. et al. 2009. Acoustic emission for monitoring aircraft structures. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 223 (5), pp.525-532. (10.1243/09544100JAERO404)

2008

• Eaton, M. J. et al. 2008. AE wave propagation and novel source location in composite plates. Presented at: 28th European Conference on Acoustic Emission Krakow, Poland
• Hensman, J. et al., 2008. Detecting and Identifying Artificial Acoustic Emission Signals in an Industrial Fatigue Environment. Applied Mechanics and Materials: Advances in Experimental Mechanics VI 13-14 , pp.251-260. (10.4028/www.scientific.net/AMM.13-14.251)
• Lark, R. J. , Pullin, R. and Holford, K. M. 2008. Acoustic emission monitoring of concrete structures. Presented at: Onsite assessment of concrete, masonry and timber structures, International RILEM Conference (SACoMaTiS 2008) Varenna, Italy
• Pullin, R. et al. 2008. A principal component analysis of acoustic emission signals from a landing gear component. Presented at: 6th International Conference on Advances in Experimental Mechanics London, UK 9-10 September 2008. Published in: Dulieu-Barton, J. M. , Dennis Lord, J. and Greene, R. J. eds. Advances in experimental mechanics VI : selected peer reviewed papers from 6th International Conference on Advances in Experimental Mechanics, 9th-11th September 2008, National Physical Laboratory, London, UK. Trans Tech. , pp.41-47. (10.4028/www.scientific.net/AMM.13-14.41)
• Pullin, R. et al. 2008. Acoustic emission monitoring of bridge structures in the field and laboratory. Presented at: 28th European Conference on Acoustic Emission Krakow, Poland
• Pullin, R. et al. 2008. Acoustic emission monitoring of bridge structures in the field and laboratory. Journal of Acoustic Emission 26 , pp.172-181.

2007

• Baxter, G. et al. 2007. Delta T source location for acoustic emission. Mechanical systems and signal processing 21 (3), pp.1512-1520. (10.1016/j.ymssp.2006.05.003)
• Eaton, M. J. et al. 2007. An investigation of frequency as an acoustic emission signal discriminator in carbon fibre composite materials. Presented at: 6th International Conference on Acoustic Emission, (ICAE6) Lake Tahoe, Nevada, USA, pp.312-217.
• Eaton, M. J. et al. 2007. Damage in carbon fibre composites: the discrimination of acoustic emission signals using frequency. Journal of Acoustic Emission 25 , pp.140-148.
• Holford, K. M. , Pullin, R. and M., B. 2007. Current practice and applications of acoustic emission. Presented at: 13th International Conference on Experimental Mechanics (ICEM 13) Alexandroupolis, Greece
• Pullin, R. et al. 2007. Novel acoustic emission source detection. Journal of Acoustic Emission 25 , pp.215-223.
• Pullin, R. et al. 2007. Novel acoustic emission source detection. Presented at: 5th International Conference on Acoustic Emission Lake Tahoe, USA
• Pullin, R. et al. 2007. Principal component analysis of acoustic emission signals from a landing gear component. Key Engineering Materials 347 , pp.139-144.
• Pullin, R. et al. 2007. Advanced location and characterisation of damage in complex metallic structures using acoustic emission. Presented at: 13th International Conference on Experimental Mechanics (ICEM07) Alexandroupolis, Greece
• Pullin, R. , Holford, K. M. and Evans, S. L. 2007. Confidence of detection of fracture signals using acoustic emission. Presented at: 5th International Conference on Advances in Experimental Mechanics, Manchester Manchester, UK
• Pullin, R. , Holford, K. M. and Evans, S. L. 2007. Confidence of detection of fractures using acoustic emission signals. Applied Mechanics and Materials 07-08 , pp.147-152. (10.4028/www.scientific.net/AMM.7-8.147)
• Pullin, R. et al. 2007. A Numerical Determination of Acoustic Emission Sensor Response in Plates Using Dispersion Curves. Key Engineering Materials 347 , pp.381-386. (10.4028/www.scientific.net/KEM.347.381)
• Pullin, R. et al. 2007. Numerical determination of acoustic emission sensor response in plates using dispersion curves. Presented at: 7th International Conference on Damage Assessment of Structures (DAMAS 2007) Turin, Italy

2006

• Bradshaw, T. P. et al., 2006. Determination of damage levels of composite plates after low velocity impact using acoustic emission. Presented at: 27th European Conference on Acoustic Emission Testing (EWGAE 2006) Cardiff, UK
• Bradshaw, T. et al., 2006. Determination of damage levels of composite plates after low velocity impacts using acoustic emission. Advanced Materials Research 13-14 , pp.253-258. (10.4028/www.scientific.net/AMR.13-14.253)
• Eaton, M. J. et al. 2006. Acoustic emission monitoring of delamination defects inbuckling CFRP composite panels. Advanced Materials Research 13-14 , pp.259-266. (10.4028/www.scientific.net/AMR.13-14.259)
• Muhamad Bunnori, N. et al., 2006. A practical investigation into acoustic wave propagation in concrete structures. Advanced Materials Research 13-14 , pp.205-212. (10.4028/www.scientific.net/AMR.13-14.205)
• Pullin, R. et al. 2006. Acoustic emission testing of a landing gear component. Advanced Materials Research 13-14 , pp.29-34. (10.4028/www.scientific.net/AMR.13-14.29)
• Pullin, R. et al. 2006. Experimental validation of dispersion curves in plates for acoustic emission. Advanced Materials Research 13-14 , pp.53-60. (10.4028/www.scientific.net/AMR.13-14.53)

2005

• Baxter, M. G. et al., 2005. Detection of fatigue crack growth in aircraft landing gear, 4 point bend specimens. Key Engineering Materials 293-94 , pp.193 -200. (10.4028/www.scientific.net/KEM.293-294.193)
• Eaton, M. J. et al. 2005. Buckling and postbuckling of impact damaged composite plates. Presented at: SEM Annual Conference Portland, USA
• Pullin, R. , Holford, K. M. and Baxter, M. G. 2005. Modal analysis of acoustic emission signals from artificial and fatigue crack sources in aerospace grade steel. Key Engineering Materials 293-29 , pp.217-224. (10.4028/www.scientific.net/KEM.293-294.217)

2004

• Baxter, M. G. , Pullin, R. and Holford, K. M. 2004. Detection of fatigue cracks in aircraft landing gear. Presented at: 26th European Conference on Acoustic Emission Testing Berlin, Germany, pp.331-341.
• Holford, K. M. et al. 2004. Acoustic emission monitoring of buckling behaviour in impact-damaged composite plates. Presented at: 26th European Conference on Acoustic Emission Testing Berlin, Germany, pp.427-434.
• Holford, K. M. , Pullin, R. and Lark, R. J. 2004. Acoustic emission modelling of concrete hinge joint models. Journal of Acoustic Emission 22 , pp.166-172.
• Pullin, R. , Holford, K. M. and Lark, R. J. 2004. An investigation of the use of acoustic emission to monitor hinge joints. Project Report.
• Pullin, R. , Holford, K. M. and Lark, R. J. 2004. Christchurch Hill (Royal Oak) Overbridge: an investigation of the use of acoustic emission to monitor the behaviour of the thrust hinges. Project Report.

2003

• Holford, K. M. , Pullin, R. and Davies, A. W. 2003. Damage location by acoustic emission techniques. Presented at: 3rd International Conference on Identification in engineering systems Swansea, UK April 2002. Published in: Lees, A. W. , Prells, U. and Norton, J. P. eds. Identification in engineering systems : proceedings of the third international conference held in Swansea, April 2002. Swansea: University of Swansea. , pp.198-207.
• Pullin, R. et al. 2003. Acoustic emission assessment of concrete hinge joints. Key Engineering Materials 245-24 , pp.323-330.
• Rippengill, S. et al., 2003. Automatic classification of acoustic emission patterns. STRAIN 39 (1), pp.31-41. (10.1046/j.1475-1305.2003.00041.x)

2002

• Pullin, R. and Holford, K. M. 2002. Single sensor source location of AE from fatigue cracks. Presented at: 25th European Conference on Acoustic Emission Testing EWGAE Prague, Czech RepublicVol. 11. , pp.95-102.

2001

• Holford, K. M. et al. 2001. Damage location in steel bridges by acoustic emission. Journal of Intelligent Material Systems and Structures 12 (8), pp.567-576. (10.1177/10453890122145311)
• Holford, K. M. et al. 2001. Visualisation and dimension reduction of acoustic emission data for damage detection. Journal of Intelligent Material Systems and Structures 12 (8), pp.529-536. (10.1177/10453890122145375)

1999

• Pullin, R. , Carter, D. C. and Holford, K. M. 1999. Damage assessment in steel bridges. Presented at: International Conference on Damage Assessment of Structures (DAMAS 99) Dublin, Ireland 28-30 June 1999. Published in: Gilchrist, M. D. , Dulieu-Barton, J. M. and Worden, K. eds. Damage Assessment of Structures. Key Engineering Materials Vol. 167/68. Durnten-Zurich: Trans Tech Publications. , pp.335-342.