Dr Yiqin Xue

2024

• Habil, M. et al. 2024. Optimisation of sliding mode parameters using different algorithms to control the position of a linear DC motor. Presented at: International Conference on Advance Computing and Ingenious Technology in Engineering Science 2024 30-31 December 2021. Proceedings of International Conference on Advance Computing and Ingenious Technology in Engineering Science. Vol. 2816.Vol. 1. AIP. (10.1063/5.0179462)

2023

• Habil, M. et al. 2023. Analyzing the design and performance of a DC linear stepper motor. Machines 11 (8) 785. (10.3390/machines11080785)

2020

• Alamili, A. , Xue, Y. and Anayi, F. 2020. Laboratory-based examination of the effect of rotational inertia on energy recuperation in the regenerative braking process. Presented at: 4th Annual CDT Conference in Energy Storage and Its Applications Southampton, UK 9-10 July 2019. Published in: Cruden, A. ed. 4th Annual CDT Conference in Energy Storage and Its Applications. Vol. 6 (5).Vol. Supple. Elsevier. , pp.43-52. (10.1016/j.egyr.2020.02.026)

2019

• Al-Zughaibi, A. , Xue, Y. and Grosvenor, R. 2019. A new insight into modelling passive suspension real test rig system with consideration of nonlinear friction forces. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 233 (8), pp.2257-2266. (10.1177/0954407018764942)
• Al-Zughaibi, A. et al. 2019. Design and investigation of PA controller for driving nonlinear electro hydraulic actuator with new active suspension system model. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 233 (13), pp.3460-3479. (10.1177/0954407018822254)
• Alamili, A. , Xue, Y. and Anayi, F. 2019. An experimental and analytical study of the ultra-capacitor storage unit used in regenerative braking systems. Energy Procedia 159 , pp.376-381. (10.1016/j.egypro.2018.12.073)

2017

• Okon, A. et al. 2017. Acoustic dynamics of a swirl premixed combustor with different operating conditions. Energy Procedia 142 , pp.1674-1679. (10.1016/j.egypro.2017.12.548)

2016

• Okon, A. et al. 2016. Heat release rate and pressure fluctuations of a lean premixed flame at different forcing levels. Presented at: The International Conference for Students on Applied Engineering Newcastle upon Tyne, UK 20-21 October 2016. Published in: Al-Shibaany, Z. Y. A. and Hameed, A. F. eds. 2016 International Conference for Students on Applied Engineering (ICSAE) Proceedings. Piscataway, NJ: IEEE. , pp.232-236. (10.1109/ICSAE.2016.7810194)

2011

• Zhu, H. et al. 2011. Size-dependent mechanical properties of nano-cellular materials. Presented at: 3M-NANO International Conference Changchun, China 26 August - 2 September 2011.

2010

• Carruthers-Watt, B. N. , Xue, Y. and Morris, A. J. 2010. A vision based system for strip tracking measurement in the finishing train of a hot strip mill. Presented at: IEEE International Conference on Mechatronics and Automation Xi'an, China 4-7 August 2010. The 2010 IEEE International Conference on Mechatronics and Automation (August 4-7, 2010, Xi'an, China). Piscataway, NJ: IEEE. , pp.1115-1120. (10.1109/ICMA.2010.5589402)
• Davies, D. L. et al. 2010. Comparison between experimental and computer modelling results for a pneumatic/hydraulic hybrid cylinder. Presented at: IEEE International Conference on Mechatronics and Automation Xi'an, China 4-7 August 2010. International Conference on Mechatronics and Automation (ICMA 2010, Xi'an, China). Piscataway, NJ: Institute of Electrical and Electronics Engineers ( IEEE ). , pp.2004-2008. (10.1109/ICMA.2010.5589197)
• Xue, Y. and Lewis, J. P. 2010. Consideration of control edge geometry to power steering characteristics. Presented at: IEEE International Conference on Mechatronics and Automation Xi'an, China 4-7 August 2010. ICMA 2010 2010 IEEE International Conference on Mechatronics and Automation: August 4-7, 2010, Xi'an, China. Piscataway, NJ: IEEE. , pp.583-588. (10.1109/ICMA.2010.5588374)

2009

• Bergada, J. M. et al., 2009. Experimental investigation in axial piston pumps barrel dynamics. Presented at: 10th International Conference on fluid control, measurements and visualisation (FLUCOME) Moscow, Russia
• Davies, D. L. et al., 2009. Experimental investigation into improved wrapper control of hot strip steel rolling mill downcoilers. Presented at: 2009 ASME Dynamic Systems and Control Conference Hollywood, California, USA
• Davies, D. L. I. et al., 2009. Mechanical design improvement to hot mill downcoiler. Presented at: 5th European Rolling Conference (ERC5) London, UK

2008

• Zhu, Y. and Xue, Y. 2008. Modelling and simulation of variable displacement hydraulic pumps. Machine Tool and Hydraulics 36 (9), pp.263-267.

2006

• Xue, Y. et al. 2006. Dynamic modelling of low frequency oscillation in a swirl burned system using artificial neural networks. Journal of the Energy Institute 79 (4), pp.232-240.

2005

• Xue, Y. , Qin, Y. and Syred, N. 2005. Controller prediction using artificial neural networks. Presented at: 4th Conference on Applied Cybernetics London, UK, pp.100-104.
• Xue, Y. and Watton, J. 2005. Modelling of a hydraulic power steering system. International Journal of Vehicle Design 38 (2/3), pp.162-178. (10.1504/IJVD.2005.007290)
• Xue, Y. and Yosup, M. Y. 2005. Time domain simulation of air transmission lines. Presented at: 8th International Symposium on Fluid Control, Measurement and Visualisation (FLUCOME) Chengdu, ChinaVol. 277.

2004

• Xue, Y. 2004. Control of a time-delay system using network prediction and gain scheduling method. Presented at: 6th International Conference on Frontiers of Design and Manufacturing Xi'an, China
• Xue, Y. , Yusop, M. J. and Ji, X. 2004. Energy saving in pneumatic actuation using the gas law prediction. Presented at: Bath Workshop on Power Transmission and Motion Control (5th:2003) Bath, UK 10-12 September 2003. Published in: Burrows, C. R. and Edge, K. A. eds. Bath Workshop on Power Transmission and Motion Control: PTMC 2003. Vol. 1.London: Professional Engineering Publishing. , pp.319-331.

2003

• Xue, Y. et al. 2003. Dynamic modelling of a swirl burner using artificial neural networks. Presented at: Proceedings Combustion and Noise Control Symposium Cranfield, UKCranfield University Press

2002

• Xue, Y. and Watton, J. 2002. Issues on motion control using visual feedback. Presented at: Institution of Mechanical Engineers (IMechE) seminar: Recent Developments in Control Techniques for Actuators London, UK 9 December 2002. Proceedings of Recent Development in Control Techniques for Actuators, London, UK, 9 December 2002. London: Institution of Mechanical Engineers
• Xue, Y. and Watton, J. 2002. Neutral prediction in control of time-delay systems. Presented at: Institution of Mechanical Engineers (IMechE) seminar: Recent Developments in Control Techniques for Actuators London, UK 9 December 2002. Proceedings of Recent Development in Control Techniques for Actuators, London, UK, 9 December 2002. London: Institution of Mechanical Engineers
• Xue, Y. and Watton, J. 2002. Position control of a pneumatic servo-actuator with time-delay using a neural network predictor. Presented at: The 5th JFPS International Symposium on Fluid Power Nara, Japan, pp.637-642.