Dr Samuel Bigot
(he/him)
PhD, MEng
Reader - Head of International for Mechanical and Medical Engineering
- Available for postgraduate supervision
Overview
Dr Samuel Bigot is a Reader at Cardiff School of Engineering. He is also Head of International for Mechanical and Medical Engineering studies.
Personal statement :
Since the beginning of my academic career, I have been focusing my research on innovative and emerging manufacturing technologies and in particular machine learning, micro manufacturing and Additive Manufacturing/3D printing, combining them when relevant.
This highlights a particular aspect of my research activities. The machine learning techniques I am developing can be seen as enabling-technologies that can be used for modelling and knowledge discovery in other research fields, but in particular in my main other areas of interest, micro manufacturing and additive manufacturing.
At the same time, the micro manufacturing process chains I am developing also act as enabling-technologies for other field of research, such as for the development of novel medical devices or in thermo-fluidic applications.
More recently, I have also been looking at how to integrate emerging 3D printing techniques into more advanced and reliable manufacturing process chains, such as through the monitoring (using machine learning) and post processing of metal ALM components using laser ablation or through the development of novel material for 3D printing
This wide range of activities is reflected by the range of joint publications I contributed to and by the range of co-authors coming from various research disciplines that I worked with on various interdisciplinary project, both as coordinator and as co-investigator. These projects covered different aspects of technologies development from fundamental research to technology transfer and networking activities.
Publication
2024
- Escudero Ornelas, A., Valera Medina, A., Bigot, S. and Bhaduri, D. 2024. A study on the influence of laser surface texturing parameters on the dimensional accuracy of the textured designs. Presented at: Cardiff University School of Engineering Research Conference 2024, Cardiff, Wales, 12-14 June 2024 Presented at Spezi, E. and Bray, M. eds.Cardiff University School of Engineering Research Conference 2024. Cardiff, Wales: Cardiff University Press pp. 57-61., (10.18573/conf3.n)
- Green, T., Nishio, W., Bigot, S., Brousseau, E. and Bhaduri, D. 2024. Laser surface texturing of bulk metallic glass for orthopaedic application. Presented at: School of Engineering Research Conference 2024, Cardiff, UK, 12-14 June 2024 Presented at Spezi, E. and Bray, M. eds.Proceedings of the Cardiff University School of Engineering Research Conference 2024.. Cardiff, Wales: Cardiff University Press, (10.18573/conf3.b)
- Le Roux, L., Soroka, A., Ji, Z., Kerfiden, P. and Bigot, S. 2024. Developing rapid metal AM deformations prediction using CNN. Presented at: 17th CIRP Conference on Intelligent Computation in Manufacturing Engineering, Gulf of Naples, Italy, 12-14 July 2023, Vol. 126. pp. 567-572., (10.1016/j.procir.2024.08.241)
- Sibanda, P. S., Ryan, M. and Bigot, S. 2024. A model for the rapid prediction of small feature width producible by Metal AM. Presented at: 17th CIRP Conference on Intelligent Computation in Manufacturing Engineering, Gulf of Naples, Italy, 12-14 July 2023Procedia CIRP, Vol. 126. Elsevier pp. 597-602., (10.1016/j.procir.2024.08.246)
- Alamri, N., Packianather, M. and Bigot, S. 2024. A movel hybrid Bees Regression Convolutional Neural Network (BA-RCNN) applied to porosity prediction in selective laser melting parts. Presented at: Cardiff University Engineering Research Conference 2023, Cardiff, UK, 12-14 July 2023 Presented at Spezi, E. and Bray, M. eds.Proceedings of the Cardiff University Engineering Research Conference 2023. Cardiff: Cardiff University Press pp. 95-99., (10.18573/conf1.w)
- Escudero Ornelas, A., Davey, E., Valera Medina, A., Bigot, S. and Bhaduri, D. 2024. A study on the surface chemistry of laser textured parts. Presented at: Cardiff University Engineering Research Conference 2023, Cardiff, UK, 12-14 July 2023 Presented at Spezi, E. and Bray, M. eds.Proceedings of the Cardiff University Engineering Research Conference 2023. Cardiff: Cardiff University Press pp. 128-132., (10.18573/conf1.ad)
2023
- Alamri, N. M., Packianather, M. and Bigot, S. 2023. Optimizing the parameters of long short-term memory networks using the bees algorithm. Applied Sciences 13(4), article number: 2536. (10.3390/app13042536)
- Bhaduri, D., Mason, B., Bigot, S. and Ji, Z. 2023. Development and realisation of a metal additive manufacturing pilot line and post-processing of parts via laser ablation and polishing. Presented at: 8th Industrial Laser Applications Symposium, Daventry, UK, 22 - 23 March 2023.
2022
- Alamri, N. M. H., Packianather, M. and Bigot, S. 2022. Optimization of convolutional neural network topology and training parameters using Bees Algorithm. Presented at: IEEE 2nd International Symposium on Sustainable Energy, Signal Processing and Cyber Security (iSSSC), Gunupur, Odisha, India, 15-17 December 2022Proceedings of 2nd International Symposium on Sustainable Energy, Signal Processing and Cyber Security. IEEE pp. 1-6., (10.1109/iSSSC56467.2022.10051487)
- Alamri, N. M. H., Packianather, M. and Bigot, S. 2022. Predicting the porosity in selective laser melting parts using hybrid regression convolutional neural network. Applied Sciences 12(24), article number: 12571. (10.3390/app122412571)
- Feng, S., Chen, Z., Bircher, B., Ji, Z., Nyborg, L. and Bigot, S. 2022. Predicting laser powder bed fusion defects through in-process monitoring data and machine learning. Materials & Design 222, article number: 111115. (10.1016/j.matdes.2022.111115)
- Liu, C., Le Roux, L., Körner, C., Tabaste, O., Lacan, F. and Bigot, S. 2022. Digital twin-enabled collaborative data management for metal additive manufacturing systems. Journal of Manufacturing Systems 62, pp. 857-874. (10.1016/j.jmsy.2020.05.010)
- Alamri, N. M., Packianather, M. and Bigot, S. 2022. Deep learning: parameter optimization using proposed novel hybrid bees Bayesian convolutional neural network. Applied Artificial Intelligence 36(1), article number: 2031815. (10.1080/08839514.2022.2031815)
- Escudero Ornelas, A., Bhaduri, D., Martinez Zavala, H., Valera Medina, A. and Bigot, S. 2022. On the performance evaluation of microtextured surfaces using computational fluid dynamics: a comparative study. Presented at: World Congress on Micro and Nano Manufacturing - WCMNM 2022, Leuven, Belgium, 19-22 September 2022.
2021
- Le Roux, L. et al. 2021. Automatised quality assessment in additive layer manufacturing using layer-by-layer surface measurements and deep learning. Presented at: 14th CIRP Conference on Intelligent Computation in Manufacturing Engineering 2020, Naples, Italy, 15-17 July 2020, Vol. 99. Elsevier pp. 342-347., (10.1016/j.procir.2021.03.050)
- Jiao, Y. et al. 2021. In vitro cytocompatibility of a Zr-based metallic glass modified by laser surface texturing for potential implant applications. Applied Surface Science 547, article number: 149194. (10.1016/j.apsusc.2021.149194)
- Jiao, Y. et al. 2021. Softening and hardening on a Zr-based bulk metallic glass induced by nanosecond laser surface melting. Materials Science and Engineering: A 803, article number: 140497. (10.1016/j.msea.2020.140497)
2020
- Jiao, Y. et al. 2020. Investigations in the fabrication of surface patterns for wettability modification on a Zr-based bulk metallic glass by nanosecond laser surface texturing. Journal of Materials Processing Technology 283, article number: 116714. (10.1016/j.jmatprotec.2020.116714)
- Surleraux, A., Lepert, R., Pernot, J., Kerfriden, P. and Bigot, S. 2020. Machine learning based reverse modelling approach for rapid tool shape optimization in die-sinking μEDM. Journal of Computing and Information Science in Engineering 23(3), article number: 31002. (10.1115/1.4045956)
- Bhaduri, D., Espinosa, J. N., Patole, S., Figueroa, D. and Bigot, S. 2020. Removal of surface contaminants using laser cleaning process. Presented at: CIRP Winter Meeting 2020, Paris, France, 19-21 February 2020.
- Martinez-Zavala, H., Bhaduri, D., Petkov, P., Valera-Medina, A. and Bigot, S. 2020. Effects of laser microtextured surfaces in condensation heat transfer. Procedia CIRP 95, pp. 927-932. (10.1016/j.procir.2020.01.184)
2019
- Jiao, Y., Brousseau, E., Han, Q., Zhu, H. and Bigot, S. 2019. Investigations in nanosecond laser micromachining on the Zr52.8Cu17.6Ni14.8Al9.9Ti4.9 bulk metallic glass: experimental and theoretical study. Journal of Materials Processing Technology 273, article number: 116232. (10.1016/j.jmatprotec.2019.05.013)
- Martinez Zavala, H., Bhaduri, D., Valera Medina, A. and Bigot, S. 2019. Experimental study on heat transfer enhancement during condensation using microstructured surfaces. Presented at: International Conference on Applied Energy 2019, Västerås, Sweden, 12-15 Aug 2019.
- Sibanda, P., Carr, P., Ryan, M. and Bigot, S. 2019. State of the art in surface finish of metal additive manufactured parts. Presented at: 17th International Conference on Manufacturing Research (ICMR 2019), Belfast, Northern Ireland, 10-12 September 2019 Presented at Lin, Y. and Price, M. eds.Advances in Manufacturing Technology XXXIII: Proceedings of the 17th International Conference on Manufacturing Research, incorporating the 34th National Conference on Manufacturing Research, Vol. 9. Advances in Dransdisciplinary Engineering Netherlands: IOS Press BV pp. 221 - 225., (10.3233/ATDE190039)
2018
- Claus, S., Bigot, S. and Kerfriden, P. 2018. CutFEM method for Stefan--Signorini problems with application in pulsed laser ablation. SIAM Journal on Scientific Computing 40(5), pp. B1444-B1469. (10.1137/18M1185697)
- Babenko, M., Sweeney, J., Petkov, P., Lacan, F., Bigot, S. and Whiteside, B. 2018. Evaluation of heat transfer at the cavity-polymer interface in microinjection moulding based on experimental and simulation study. Applied Thermal Engineering 130, pp. 865-876. (10.1016/j.applthermaleng.2017.11.022)
2017
- Al-Fahham, M., Hatem, F. A., Al-Dulami, Z., Valera Medina, A. and Bigot, S. 2017. Experimental study to enhance swirl burner against boundary layer flashback. Energy Procedia 142, pp. 1534-1538. (10.1016/j.egypro.2017.12.604)
- Al-Fahham, M., Hatem, F., Valera Medina, A. and Bigot, S. 2017. Investigation of boundary layer flashback enhancement in swirl burner using woven wire mesh. Presented at: 8th European Combustion Meeting 2017, Dubrovnik, Croatia, 18-21 April 2017.
- Al-Fahham, M., Hatem, F. A., Alsaegh, A. S., Valera Medina, A., Bigot, S. and Marsh, R. 2017. Experimental study to enhance resistance for boundary layer flashback in swirl burners using microsurfaces. Presented at: ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, North Carolina, USA, 26-30 June 2017ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, Vol. 4A. ASME, (10.1115/GT2017-63367)
2016
- Al-Fahham, M., Bigot, S. and Valera Medina, A. 2016. A study of fluid flow characteristics using microstructured surfaces produced by WEDM. Presented at: 4M/IWMF2016 Conference, Lyngby, Denmark, 13-15 September 2016.
- Surleraux, A., Pernot, J., Elkaseer, A. and Bigot, S. 2016. Iterative surface warping to shape craters in micro-EDM simulation. Engineering with Computers 32, pp. 517-531. (10.1007/s00366-016-0439-0)
- Surleraux, A., Pernot, J. and Bigot, S. 2016. A comparative study between NURBS surfaces and voxels to simulate the wear phenomenon in micro-EDM. Computer-Aided Design and Applications 13(6), pp. 792-798. (10.1080/16864360.2016.1168222)
- Dorrington, P., Lacan, F. A. and Bigot, S. 2016. How are micro enterprises adopting emergent technologies?. Presented at: 3rd International Conference on Sustainable Design and Manufacturing (SDM-2016), Chania, Greece, 4-6 April 2016 Presented at Setchi, R. et al. eds.Sustainable Design and Manufacturing 2016, Vol. 52. Smart Innovation, Systems and Technologies (SIST) Vol. 52. Cham: Springer pp. 215-226., (10.1007/978-3-319-32098-4_19)
- Bigot, S., D'Urso, G., Pernot, J., Merla, C. and Surleraux, A. 2016. Estimating the energy repartition in micro electrical discharge machining. Precision Engineering 43, pp. 479-485. (10.1016/j.precisioneng.2015.09.015)
2015
- Okhiria, D., Giebaly, D. E., Meydan, T., Bigot, S. and Theobald, P. 2015. In vivo monitoring of orthopaedic implant wear using amorphous ribbons. IEEE Transactions on Magnetics 51(1), article number: 4002303. (10.1109/TMAG.2014.2356715)
2014
- Bigot, S. et al. 2014. Micro and nano structuring of sapphire for Micro Injection process investigation. Presented at: 9th International Conference on Micromanufacturing, Singapore, China, 25-28 March 2014.
- Bigot, S., Pernot, J., D’Urso, G., Merla, C., Peyroutet, J. and Surleraux, A. 2014. Estimating the exchanged energy distribution in micro-EDM. Presented at: 9th International Conference on MicroManufacturing, Singapore, China, 25-28 March 2014.
2013
- Bigot, S., Pernot, J., Surleraux, A. and Elkaseer, A. 2013. Micro-EDM numerical simulation and experimental Validation. Presented at: 10th International Conference on Multi-Material Micro Manufacture, San Sebastian, Spain, 8-10 October 2013 Presented at Azcárate, S. and Dimov, S. eds.Proceedings of the 10th International Conference on Multi-Material Micro Manufacture. Singapore, China: Research Publishing, (10.3850/978-981-07-7247-5_414)
- Rees, A., Brousseau, E. B. J. P., Dimov, S. S., Bigot, S. and Griffiths, C. A. 2013. Development of surface roughness optimisation and prediction for the process of wire electro-discharge grinding. International Journal of Advanced Manufacturing Technology 64(9-12), pp. 1395-1410. (10.1007/s00170-012-4110-7)
- Minev, R., Minev, E. and Bigot, S. 2013. How to implement the grid method analyses for capability studies of MNTs. Presented at: 9th International Conference on Multi-Material Micro Manufacture, Vienna, Austria, 9-11 October 2012.
- Elkaseer, A., Bigot, S., Surleraux, A. and Rosochowski, A. 2013. Effect of material microstructure on the micro-EDM process. Presented at: 8th International Conference on MicroManufacturing (ICOMM2013), Victoria, Canada, 25-28 March 2013.
2012
- Dimov, S. S., Brousseau, E. B. J. P., Minev, R. and Bigot, S. 2012. Micro- and nano-manufacturing: Challenges and opportunities. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 226(1), pp. 3-15. (10.1177/0954406211422972)
- Bigot, S., Surleraux, A., Bissacco, G. and Valentinčič, J. 2012. A new modelling framework for die-sinking micro EDM. Presented at: 9th International Conference on Multi-Material Micro Manufacture, Vienna, Austria, 9-11 October 2012.
- Minev, R., Minev, E. and Bigot, S. 2012. Capability study of MNT processes using Grid Method. Presented at: 9th International Conference on Multi-Material Micro Manufacture, Vienna, Austria, 9-11 October 2012.
2011
- Bigot, S. 2011. A new rule space representation scheme for rule induction in classification and control applications. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering 225(7), pp. 1018-1038. (10.1177/0959651810396292)
- Bigot, S., Nestler, J., Dorrington, P. and Dimov, S. 2011. A costing methodology for products based on emerging micro and nano manufacturing technologies. Micro and Nanosystems 3(3), pp. 254-262.
- Bigot, S., Dorrington, P. and Dimov, S. S. 2011. Manufacturing routes costs comparison for emerging micro and nano technologies. Presented at: 7th International Conference on Multi-Material Micro Manufacture, Bourg en Bresse and Oyonnax, France, 17-19 November 2010 Presented at Fillon, B., Khan-Malek, C. and Dimov, S. eds.Proceedings of the 7th International Conference on Multi-Material Micro Manufacture, 17-19 November 2010 Bourg en Bresse and Oyonnax, France. Singapore: Research Publishing pp. 199-202., (10.3850/978-981-08-6555-9_135)
- Bigot, S., Minev, E., Dimov, S. S. and Dobrev, T. 2011. Function and length scale integration in innovative products - technical solutions and new organisational models. International Journal of Manufacturing Technology and Management 23(3/4), pp. 157-178. (10.1504/IJMTM.2011.045514)
- Bigot, S., Bissacco, G. and Valentinčič, J. 2011. Die-sinking micro EDM for complex 3D structuring - research directions. Presented at: 8th International Conference on Multi-Material Micro Manufacture, Stuttgart, Germany, 8–10 November 2011.
- Gonzalez Castro, G., Babenko, M., Bigot, S., Sweeney, J., Ugail, H. and Whiteside, B. R. 2011. Thermal contact resistance in micromoulding. Presented at: Polymer Process Engineering '11, Bradford, UK, 6-7 December 2011.
2010
- Nestler, J. et al. 2010. Polymer Lab-on-Chip systems with integrated electrochemical pumps suitable for large scale fabrication. The International Journal of Advanced Manufacturing Technology 47(1-4), pp. 137-145. (10.1007/s00170-009-1948-4)
- Griffiths, C. A., Dimov, S. S., Brousseau, E. B. J. P., Chouquet, C., Gavillet, J. and Bigot, S. 2010. Investigation of surface treatment effects in micro-injection-moulding. International Journal of Advanced Manufacturing Technology 47(1-4), pp. 99-110. (10.1007/s00170-009-2000-4)
- Griffiths, C. A., Bigot, S., Brousseau, E. B. J. P., Worgull, M., Heckele, M., Nestler, J. and Auerswald, J. 2010. Investigation of polymer inserts as prototyping tooling for micro injection moulding. The International Journal of Advanced Manufacturing Technology 47(1-4), pp. 111-123. (10.1007/s00170-009-2038-3)
- Pham, D. T., Eldbib, K., Bigot, S. and Packianather, M. S. 2010. A data ordering method for the RULES family of algorithms. Presented at: I*PROMS 2009 Conference :Innovative Production Machines and Systems, Cardiff, UK, July 6-17 2009 Presented at Pham, D. T., Eldukhri, E. E. and Soroka, A. J. eds.Innovative production machines and systems: fifth I*PROMS Virtual Conference, 6-17th July 2009. Dunbeath: Whittles pp. 200-205.
- Brousseau, E. B. J. P., Barton, R., Dimov, S. S. and Bigot, S. 2010. A methodology for evaluating the technological maturity of micro and nano fabrication processes.. Presented at: Fifth International Precision Assembly Seminar, IPAS 2010, Chamonix, France. pp. 329-336.
- Bigot, S., Dimov, S. S. and Minev, R. 2010. Function and length scale integration study in emerging MST-based products. Presented at: 5th IPAS Fifth International Precision Assembly Seminar, Chamonix, France.
2009
- Bigot, S., Minev, R., Dobrev, T., Dimov, S. S. and Matthews, C. 2009. Function and length scale integration in micro/nano manufacturing. Presented at: 4M2009 -First International Conference on Multi-Material Micro Manufacture, Karlsruhe, Germany. pp. 147-152.
- Bigot, S. 2009. A study of specialisation and classification heuristics used in covering algorithms. Presented at: IPROM2009 Innovative Production Machines and Systems Fifth I*PROMS Virtual Conference, Cardiff, UK.
- Dimov, S. S. et al. 2009. 4M Network of Excellence, Progress Report 2009. Presented at: International Conference on Multi-Material Micro Manufacture (4M2009), Karlsruhe, Germany. pp. 1-9.
- Valentincic, J., Bissacco, G. and Bigot, S. 2009. Snapshot of micro EDM technology for industry. Presented at: International Conference on Multi-Material Micro Manufacture (4M2009), Karlsruhe, Germany. pp. 415-418.
- Brousseau, E. B. J. P., Barton, R., Dimov, S. S. and Bigot, S. 2009. Technology maturity assessment of micro and nano manufacturing processes. Presented at: 4M2009 - International Conference on Multi-Material Micro Manufacture, Karlsruhe, Germany. pp. 257-262.
- Bigot, S., Islam, N., Wong, H., Brousseau, E. B. J. P. and Dorrington, P. 2009. Micro and nano manufacturing Technologies - Adoption Behaviour & Challenges. Presented at: 10th International Conference on Management of Innovative Technologies, Fiesa, Slovenia.
2008
- Griffiths, C. A., Dimov, S. S., Brousseau, E. B. J. P., Chouquet, C., Gavillet, J. and Bigot, S. 2008. Micro-injection moulding: surface treatment effects on part demoulding. Presented at: 4th International Conference on Multi-Material Micro Manufacture (4M), Cardiff, UK, 9-11 September 2008 Presented at Dimov, S. and Menz, W. eds.4M 2008 : Fourth International Conference on Multi-Material Micro Manufacture, 9th-11th September 2008, Cardiff, UK. Dunbeath: Whittles pp. 245-248.
- Nestler, J. et al. 2008. Microfluidic cartridge for protein assays with integrated pumps. Presented at: 1st European Conference on Microfluidics, Bologna, Italy.
- Gavillet, J. et al. 2008. Nanostructured polymer thin films: application to biosensors. Presented at: Nanomat 2006, Rio de Janeiro, Brazil, 5-8 June 2006 Presented at Dos Santos, D. S. ed.Metastable and Nanostructured Materials III. Materials Science Forum pp. 10-18.
- Nestler, J. et al. 2008. An all-polymer microfluidic system for protein sensing applications with integrated low-cost pumps, surface modification and sealing. Presented at: Smart Systems Integration 2008, Barcelona, Spain, 9-10 April 2008.
- Nestler, J. et al. 2008. low-cost, fully intergrated liquid handling platform for protein assays. Presented at: 12th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS 2008), San Diego, USA.
- Bigot, S. 2008. A Fuzzy Rule Induction System with a New Rule Space Representation Scheme. Presented at: Proceedings 4th CIRP International Seminar on Intelligent Computation in Manufacturing Engineering, CIRP ICME '08, Naples, Italy.
2007
- Auerswald, J. et al. 2007. Bonding of glass chip based SPR sensors to thermoplastic microfluidics scaffolds. Presented at: Smart Systems Integration 2007, Paris, France, 27-28 March 2007.
- Hiller, K. et al. 2007. Integration aspects of a polymer based SPR biosensor with active micro optical and micro fluidic elements. Presented at: Smart Systems Integration 2007, Paris, France, 27-28 March 2007.
- Pham, D. T., Ivanov, A., Bigot, S., Popov, K. B. and Dimov, S. S. 2007. A study of micro-electro discharge machining electrode wear. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 221(5), pp. 605-612. (10.1243/0954406JMES413)
- Pham, D. T., Ivanov, A., Bigot, S., Popov, K. B. and Dimov, S. S. 2007. An investigation of tube and rod electrode wear in micro EDM drilling. International Journal of Advanced Manufacturing Technology 33(1-2), pp. 103-109. (10.1007/s00170-006-0639-7)
- Griffiths, C. A., Bigot, S., Brousseau, E. B. J. P., Worgull, M., Heckele, M., Nestler, J. and J., A. 2007. Polymer insert tooling for prototyping of micro fluidic components in micro injection moulding. Presented at: 3rd International Conference on Multi-Material Micro Manufacture, Borovets, Bulgaria, 3-5 October 2007 Presented at Dimov, S., Menz, W. and Toshev, Y. eds.Proceedingsof the 3rd International Conference on Multi-Material Micro Manufacture (4M2007), Borovets, Bulgaria. pp. 305-308.
- Nestler, J. et al. 2007. Electrochemical microfluidic pumps based on super absorbing polymers. Presented at: 11th International Conference on Proceedings - Miniaturized Systems for Chemistry and Life Sciences Paris (uTAS2007), Paris, France. pp. 1504-1506.
- Nestler, J., Morschhauser, A., Hiller, K., Otto, T., Bigot, S. and Gessner, T. 2007. Polymer Lab-on-Chip systems with integrated electrochemical pumps. Presented at: Proceedings of International Conference on Multi-Material Micro Manufacture (4M2007), Borovets, Bulgaria. pp. 319-322.
- Pham, D. T. et al. 2007. Recent advances in micro and nano manufacturing. Presented at: Proceedings of 4th International Conference on Digital Enterprise Technology (DET2007), Bath, UK. pp. 24-33.
2006
- Azcarate, S., Uriarte, I. L., Schoth, A., Bigot, S., Tosello, G., Roth, S. and Staemmler, L. 2006. Hybrid tooling: A review of process chains for tooling microfabrication within 4M. Presented at: Proceedings of the 2nd International Conference on Multi-Material Micro Manufacture, 4M, Grenoble, France.
- Bigot, S., Valentincic, J., Blatnik, O. and Junkar, M. 2006. Micro EDM parameters optimisation. Presented at: Proceedings of the 2nd International Conference on Multi-Material Micro Manufacture, 4M2006, Grenoble, France.
- Nestler, J. et al. 2006. A new technology platform for fully integrated polymer based micro optical fluidic systems. Presented at: Proceedings of the 2nd International Conference on Multi-Material Micro Manufacture (4M2006), Grenoble, France.
- Pham, D. T., Bigot, S. and Dimov, S. S. 2006. Rules-F: a fuzzy inductive learning algorithm. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 220(C: J), pp. 1433-1447. (10.1243/0954406C20004)
2005
- Bigot, S., Popov, K. B. and Ivanov, A. 2005. A study of the micro EDM electrode wear. Presented at: 4M 2005: 1st International Conference on Multi-Material Micro Manufacture, Forschungszentrum Karlsruhe, Karlsruhe, Germany, 29 June - 1 July 2005 Presented at Menz, W. and Dimov, S. S. eds.Proceedings: 4M 2005: 1st International Conference on Multi-Material Micro Manufacture. Amsterdam: Elsevier
- Pham, D. T., Dimov, S. S., Bigot, S., Ivanov, A. and Popov, K. B. 2005. Micro EDM drilling: Accuracy study. Presented at: 5th International Conference on Integrated Design and Manufacturing in Mechanical Engineering, Bath, UK, 5- 7 April 2004 Presented at Bramley, A. et al. eds.Advances in Integrated Design and Manufacturing in Mechanical Engineering. Springer pp. 281-294.
- Pham, D. T., Dimov, S. S., Bigot, S., Ivanov, A. and Popov, K. B. 2005. Micro-EDM drilling: accuracy study, advances in integrated design and manufacturing in mechanical engineering. In: Bramley, A. et al. eds. Advances in Integrated Design and Manufacturing in Mechanical Engineering. Dordrecht: Springer, pp. 281-294.
2004
- Bigot, S., Dimov, S. S., Ivanov, A. and Pham, D. T. 2004. Micro-EDM—recent developments and research issues. Journal of Materials Processing Technology 149(1-3), pp. 50-57. (10.1016/j.jmatprotec.2004.02.008)
- Pham, D. T., Packianather, M. S., Dimov, S. S., Soroka, A. J., Gerard, T., Bigot, S. and Salem, Z. 2004. An application of datamining and machine learning techniques in the metal industry. Presented at: Proceedings 4th CIRP International Seminar on Intelligent Computation in Manufacturing Engineering, Sorrento, Italy. pp. 617-620.
- Pham, D. T., Bigot, S. and Dimov, S. S. 2004. A new technique for fuzzy rule induction. Presented at: Proceedings 4th CIRP International Seminar on Intelligent Computation in Manufacturing (ICME '04), Sorrento, Italy. pp. 621-626.
- Dimov, S. S., Pham, D. T., Bigot, S., Ivanov, A. and Popov, K. B. 2004. A Study of the Accuracy of the Micro Electrical Discharge Machining Drilling Process. Presented at: 5th International Conference on Integrated Design and Manufacturing in Mechanical Engineering, Bath, UK, 5- 7 April 2004Proceedings of the 5th International Conference on Integrated Design and Manufacturing in Mechanical Engineering,( IDMME) (Bath, UK). University of Bath pp. 1-12.
- Pham, D. T., Dimov, S. S., Bigot, S., Ivanov, A. and Popov, K. B. 2004. Micro-EDM - recent developments and research issues. Journal of Materials Processing Technology 149(1-3), pp. 50-57. (10.1016/j.jmatprotec.2004.02.008)
- Pham, D. T., Bigot, S. and Dimov, S. S. 2004. A rule merging technique for handling noise in inductive learning. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 218(10), pp. 1255-1268. (10.1243/0954406042369017)
2003
- Bigot, S., Dimov, S. and Pham, D. T. 2003. RULES-5: a rule induction algorithm for classification problems involving continuous attributes. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 217(12), pp. 1273-1286. (10.1243/095440603322769929)
- Pham, D. T., Bigot, S. and Dimov, S. S. 2003. Rules-5: a rule induction algorithm for classification problems involving continuous attributes. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 217(12), pp. 1273-1286. (10.1243/095440603322769929)
2002
- Pham, D. T., Dimov, S. S. and Bigot, S. 2002. A new pruning technique for inductive learning. Presented at: Proceedings of the 3rd CIRP International Seminar on Intelligent Computation in Manufacturing Engineering(ICME 2002), Ischia, Italy. pp. 449-454.
Articles
- Alamri, N. M., Packianather, M. and Bigot, S. 2023. Optimizing the parameters of long short-term memory networks using the bees algorithm. Applied Sciences 13(4), article number: 2536. (10.3390/app13042536)
- Alamri, N. M. H., Packianather, M. and Bigot, S. 2022. Predicting the porosity in selective laser melting parts using hybrid regression convolutional neural network. Applied Sciences 12(24), article number: 12571. (10.3390/app122412571)
- Feng, S., Chen, Z., Bircher, B., Ji, Z., Nyborg, L. and Bigot, S. 2022. Predicting laser powder bed fusion defects through in-process monitoring data and machine learning. Materials & Design 222, article number: 111115. (10.1016/j.matdes.2022.111115)
- Liu, C., Le Roux, L., Körner, C., Tabaste, O., Lacan, F. and Bigot, S. 2022. Digital twin-enabled collaborative data management for metal additive manufacturing systems. Journal of Manufacturing Systems 62, pp. 857-874. (10.1016/j.jmsy.2020.05.010)
- Alamri, N. M., Packianather, M. and Bigot, S. 2022. Deep learning: parameter optimization using proposed novel hybrid bees Bayesian convolutional neural network. Applied Artificial Intelligence 36(1), article number: 2031815. (10.1080/08839514.2022.2031815)
- Jiao, Y. et al. 2021. In vitro cytocompatibility of a Zr-based metallic glass modified by laser surface texturing for potential implant applications. Applied Surface Science 547, article number: 149194. (10.1016/j.apsusc.2021.149194)
- Jiao, Y. et al. 2021. Softening and hardening on a Zr-based bulk metallic glass induced by nanosecond laser surface melting. Materials Science and Engineering: A 803, article number: 140497. (10.1016/j.msea.2020.140497)
- Jiao, Y. et al. 2020. Investigations in the fabrication of surface patterns for wettability modification on a Zr-based bulk metallic glass by nanosecond laser surface texturing. Journal of Materials Processing Technology 283, article number: 116714. (10.1016/j.jmatprotec.2020.116714)
- Surleraux, A., Lepert, R., Pernot, J., Kerfriden, P. and Bigot, S. 2020. Machine learning based reverse modelling approach for rapid tool shape optimization in die-sinking μEDM. Journal of Computing and Information Science in Engineering 23(3), article number: 31002. (10.1115/1.4045956)
- Martinez-Zavala, H., Bhaduri, D., Petkov, P., Valera-Medina, A. and Bigot, S. 2020. Effects of laser microtextured surfaces in condensation heat transfer. Procedia CIRP 95, pp. 927-932. (10.1016/j.procir.2020.01.184)
- Jiao, Y., Brousseau, E., Han, Q., Zhu, H. and Bigot, S. 2019. Investigations in nanosecond laser micromachining on the Zr52.8Cu17.6Ni14.8Al9.9Ti4.9 bulk metallic glass: experimental and theoretical study. Journal of Materials Processing Technology 273, article number: 116232. (10.1016/j.jmatprotec.2019.05.013)
- Claus, S., Bigot, S. and Kerfriden, P. 2018. CutFEM method for Stefan--Signorini problems with application in pulsed laser ablation. SIAM Journal on Scientific Computing 40(5), pp. B1444-B1469. (10.1137/18M1185697)
- Babenko, M., Sweeney, J., Petkov, P., Lacan, F., Bigot, S. and Whiteside, B. 2018. Evaluation of heat transfer at the cavity-polymer interface in microinjection moulding based on experimental and simulation study. Applied Thermal Engineering 130, pp. 865-876. (10.1016/j.applthermaleng.2017.11.022)
- Al-Fahham, M., Hatem, F. A., Al-Dulami, Z., Valera Medina, A. and Bigot, S. 2017. Experimental study to enhance swirl burner against boundary layer flashback. Energy Procedia 142, pp. 1534-1538. (10.1016/j.egypro.2017.12.604)
- Surleraux, A., Pernot, J., Elkaseer, A. and Bigot, S. 2016. Iterative surface warping to shape craters in micro-EDM simulation. Engineering with Computers 32, pp. 517-531. (10.1007/s00366-016-0439-0)
- Surleraux, A., Pernot, J. and Bigot, S. 2016. A comparative study between NURBS surfaces and voxels to simulate the wear phenomenon in micro-EDM. Computer-Aided Design and Applications 13(6), pp. 792-798. (10.1080/16864360.2016.1168222)
- Bigot, S., D'Urso, G., Pernot, J., Merla, C. and Surleraux, A. 2016. Estimating the energy repartition in micro electrical discharge machining. Precision Engineering 43, pp. 479-485. (10.1016/j.precisioneng.2015.09.015)
- Okhiria, D., Giebaly, D. E., Meydan, T., Bigot, S. and Theobald, P. 2015. In vivo monitoring of orthopaedic implant wear using amorphous ribbons. IEEE Transactions on Magnetics 51(1), article number: 4002303. (10.1109/TMAG.2014.2356715)
- Rees, A., Brousseau, E. B. J. P., Dimov, S. S., Bigot, S. and Griffiths, C. A. 2013. Development of surface roughness optimisation and prediction for the process of wire electro-discharge grinding. International Journal of Advanced Manufacturing Technology 64(9-12), pp. 1395-1410. (10.1007/s00170-012-4110-7)
- Dimov, S. S., Brousseau, E. B. J. P., Minev, R. and Bigot, S. 2012. Micro- and nano-manufacturing: Challenges and opportunities. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 226(1), pp. 3-15. (10.1177/0954406211422972)
- Bigot, S. 2011. A new rule space representation scheme for rule induction in classification and control applications. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering 225(7), pp. 1018-1038. (10.1177/0959651810396292)
- Bigot, S., Nestler, J., Dorrington, P. and Dimov, S. 2011. A costing methodology for products based on emerging micro and nano manufacturing technologies. Micro and Nanosystems 3(3), pp. 254-262.
- Bigot, S., Minev, E., Dimov, S. S. and Dobrev, T. 2011. Function and length scale integration in innovative products - technical solutions and new organisational models. International Journal of Manufacturing Technology and Management 23(3/4), pp. 157-178. (10.1504/IJMTM.2011.045514)
- Nestler, J. et al. 2010. Polymer Lab-on-Chip systems with integrated electrochemical pumps suitable for large scale fabrication. The International Journal of Advanced Manufacturing Technology 47(1-4), pp. 137-145. (10.1007/s00170-009-1948-4)
- Griffiths, C. A., Dimov, S. S., Brousseau, E. B. J. P., Chouquet, C., Gavillet, J. and Bigot, S. 2010. Investigation of surface treatment effects in micro-injection-moulding. International Journal of Advanced Manufacturing Technology 47(1-4), pp. 99-110. (10.1007/s00170-009-2000-4)
- Griffiths, C. A., Bigot, S., Brousseau, E. B. J. P., Worgull, M., Heckele, M., Nestler, J. and Auerswald, J. 2010. Investigation of polymer inserts as prototyping tooling for micro injection moulding. The International Journal of Advanced Manufacturing Technology 47(1-4), pp. 111-123. (10.1007/s00170-009-2038-3)
- Pham, D. T., Ivanov, A., Bigot, S., Popov, K. B. and Dimov, S. S. 2007. A study of micro-electro discharge machining electrode wear. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 221(5), pp. 605-612. (10.1243/0954406JMES413)
- Pham, D. T., Ivanov, A., Bigot, S., Popov, K. B. and Dimov, S. S. 2007. An investigation of tube and rod electrode wear in micro EDM drilling. International Journal of Advanced Manufacturing Technology 33(1-2), pp. 103-109. (10.1007/s00170-006-0639-7)
- Pham, D. T., Bigot, S. and Dimov, S. S. 2006. Rules-F: a fuzzy inductive learning algorithm. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 220(C: J), pp. 1433-1447. (10.1243/0954406C20004)
- Bigot, S., Dimov, S. S., Ivanov, A. and Pham, D. T. 2004. Micro-EDM—recent developments and research issues. Journal of Materials Processing Technology 149(1-3), pp. 50-57. (10.1016/j.jmatprotec.2004.02.008)
- Pham, D. T., Dimov, S. S., Bigot, S., Ivanov, A. and Popov, K. B. 2004. Micro-EDM - recent developments and research issues. Journal of Materials Processing Technology 149(1-3), pp. 50-57. (10.1016/j.jmatprotec.2004.02.008)
- Pham, D. T., Bigot, S. and Dimov, S. S. 2004. A rule merging technique for handling noise in inductive learning. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 218(10), pp. 1255-1268. (10.1243/0954406042369017)
- Bigot, S., Dimov, S. and Pham, D. T. 2003. RULES-5: a rule induction algorithm for classification problems involving continuous attributes. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 217(12), pp. 1273-1286. (10.1243/095440603322769929)
- Pham, D. T., Bigot, S. and Dimov, S. S. 2003. Rules-5: a rule induction algorithm for classification problems involving continuous attributes. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 217(12), pp. 1273-1286. (10.1243/095440603322769929)
Book sections
- Pham, D. T., Dimov, S. S., Bigot, S., Ivanov, A. and Popov, K. B. 2005. Micro-EDM drilling: accuracy study, advances in integrated design and manufacturing in mechanical engineering. In: Bramley, A. et al. eds. Advances in Integrated Design and Manufacturing in Mechanical Engineering. Dordrecht: Springer, pp. 281-294.
Conferences
- Escudero Ornelas, A., Valera Medina, A., Bigot, S. and Bhaduri, D. 2024. A study on the influence of laser surface texturing parameters on the dimensional accuracy of the textured designs. Presented at: Cardiff University School of Engineering Research Conference 2024, Cardiff, Wales, 12-14 June 2024 Presented at Spezi, E. and Bray, M. eds.Cardiff University School of Engineering Research Conference 2024. Cardiff, Wales: Cardiff University Press pp. 57-61., (10.18573/conf3.n)
- Green, T., Nishio, W., Bigot, S., Brousseau, E. and Bhaduri, D. 2024. Laser surface texturing of bulk metallic glass for orthopaedic application. Presented at: School of Engineering Research Conference 2024, Cardiff, UK, 12-14 June 2024 Presented at Spezi, E. and Bray, M. eds.Proceedings of the Cardiff University School of Engineering Research Conference 2024.. Cardiff, Wales: Cardiff University Press, (10.18573/conf3.b)
- Le Roux, L., Soroka, A., Ji, Z., Kerfiden, P. and Bigot, S. 2024. Developing rapid metal AM deformations prediction using CNN. Presented at: 17th CIRP Conference on Intelligent Computation in Manufacturing Engineering, Gulf of Naples, Italy, 12-14 July 2023, Vol. 126. pp. 567-572., (10.1016/j.procir.2024.08.241)
- Sibanda, P. S., Ryan, M. and Bigot, S. 2024. A model for the rapid prediction of small feature width producible by Metal AM. Presented at: 17th CIRP Conference on Intelligent Computation in Manufacturing Engineering, Gulf of Naples, Italy, 12-14 July 2023Procedia CIRP, Vol. 126. Elsevier pp. 597-602., (10.1016/j.procir.2024.08.246)
- Alamri, N., Packianather, M. and Bigot, S. 2024. A movel hybrid Bees Regression Convolutional Neural Network (BA-RCNN) applied to porosity prediction in selective laser melting parts. Presented at: Cardiff University Engineering Research Conference 2023, Cardiff, UK, 12-14 July 2023 Presented at Spezi, E. and Bray, M. eds.Proceedings of the Cardiff University Engineering Research Conference 2023. Cardiff: Cardiff University Press pp. 95-99., (10.18573/conf1.w)
- Escudero Ornelas, A., Davey, E., Valera Medina, A., Bigot, S. and Bhaduri, D. 2024. A study on the surface chemistry of laser textured parts. Presented at: Cardiff University Engineering Research Conference 2023, Cardiff, UK, 12-14 July 2023 Presented at Spezi, E. and Bray, M. eds.Proceedings of the Cardiff University Engineering Research Conference 2023. Cardiff: Cardiff University Press pp. 128-132., (10.18573/conf1.ad)
- Bhaduri, D., Mason, B., Bigot, S. and Ji, Z. 2023. Development and realisation of a metal additive manufacturing pilot line and post-processing of parts via laser ablation and polishing. Presented at: 8th Industrial Laser Applications Symposium, Daventry, UK, 22 - 23 March 2023.
- Alamri, N. M. H., Packianather, M. and Bigot, S. 2022. Optimization of convolutional neural network topology and training parameters using Bees Algorithm. Presented at: IEEE 2nd International Symposium on Sustainable Energy, Signal Processing and Cyber Security (iSSSC), Gunupur, Odisha, India, 15-17 December 2022Proceedings of 2nd International Symposium on Sustainable Energy, Signal Processing and Cyber Security. IEEE pp. 1-6., (10.1109/iSSSC56467.2022.10051487)
- Escudero Ornelas, A., Bhaduri, D., Martinez Zavala, H., Valera Medina, A. and Bigot, S. 2022. On the performance evaluation of microtextured surfaces using computational fluid dynamics: a comparative study. Presented at: World Congress on Micro and Nano Manufacturing - WCMNM 2022, Leuven, Belgium, 19-22 September 2022.
- Le Roux, L. et al. 2021. Automatised quality assessment in additive layer manufacturing using layer-by-layer surface measurements and deep learning. Presented at: 14th CIRP Conference on Intelligent Computation in Manufacturing Engineering 2020, Naples, Italy, 15-17 July 2020, Vol. 99. Elsevier pp. 342-347., (10.1016/j.procir.2021.03.050)
- Bhaduri, D., Espinosa, J. N., Patole, S., Figueroa, D. and Bigot, S. 2020. Removal of surface contaminants using laser cleaning process. Presented at: CIRP Winter Meeting 2020, Paris, France, 19-21 February 2020.
- Martinez Zavala, H., Bhaduri, D., Valera Medina, A. and Bigot, S. 2019. Experimental study on heat transfer enhancement during condensation using microstructured surfaces. Presented at: International Conference on Applied Energy 2019, Västerås, Sweden, 12-15 Aug 2019.
- Sibanda, P., Carr, P., Ryan, M. and Bigot, S. 2019. State of the art in surface finish of metal additive manufactured parts. Presented at: 17th International Conference on Manufacturing Research (ICMR 2019), Belfast, Northern Ireland, 10-12 September 2019 Presented at Lin, Y. and Price, M. eds.Advances in Manufacturing Technology XXXIII: Proceedings of the 17th International Conference on Manufacturing Research, incorporating the 34th National Conference on Manufacturing Research, Vol. 9. Advances in Dransdisciplinary Engineering Netherlands: IOS Press BV pp. 221 - 225., (10.3233/ATDE190039)
- Al-Fahham, M., Hatem, F., Valera Medina, A. and Bigot, S. 2017. Investigation of boundary layer flashback enhancement in swirl burner using woven wire mesh. Presented at: 8th European Combustion Meeting 2017, Dubrovnik, Croatia, 18-21 April 2017.
- Al-Fahham, M., Hatem, F. A., Alsaegh, A. S., Valera Medina, A., Bigot, S. and Marsh, R. 2017. Experimental study to enhance resistance for boundary layer flashback in swirl burners using microsurfaces. Presented at: ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, North Carolina, USA, 26-30 June 2017ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, Vol. 4A. ASME, (10.1115/GT2017-63367)
- Al-Fahham, M., Bigot, S. and Valera Medina, A. 2016. A study of fluid flow characteristics using microstructured surfaces produced by WEDM. Presented at: 4M/IWMF2016 Conference, Lyngby, Denmark, 13-15 September 2016.
- Dorrington, P., Lacan, F. A. and Bigot, S. 2016. How are micro enterprises adopting emergent technologies?. Presented at: 3rd International Conference on Sustainable Design and Manufacturing (SDM-2016), Chania, Greece, 4-6 April 2016 Presented at Setchi, R. et al. eds.Sustainable Design and Manufacturing 2016, Vol. 52. Smart Innovation, Systems and Technologies (SIST) Vol. 52. Cham: Springer pp. 215-226., (10.1007/978-3-319-32098-4_19)
- Bigot, S. et al. 2014. Micro and nano structuring of sapphire for Micro Injection process investigation. Presented at: 9th International Conference on Micromanufacturing, Singapore, China, 25-28 March 2014.
- Bigot, S., Pernot, J., D’Urso, G., Merla, C., Peyroutet, J. and Surleraux, A. 2014. Estimating the exchanged energy distribution in micro-EDM. Presented at: 9th International Conference on MicroManufacturing, Singapore, China, 25-28 March 2014.
- Bigot, S., Pernot, J., Surleraux, A. and Elkaseer, A. 2013. Micro-EDM numerical simulation and experimental Validation. Presented at: 10th International Conference on Multi-Material Micro Manufacture, San Sebastian, Spain, 8-10 October 2013 Presented at Azcárate, S. and Dimov, S. eds.Proceedings of the 10th International Conference on Multi-Material Micro Manufacture. Singapore, China: Research Publishing, (10.3850/978-981-07-7247-5_414)
- Minev, R., Minev, E. and Bigot, S. 2013. How to implement the grid method analyses for capability studies of MNTs. Presented at: 9th International Conference on Multi-Material Micro Manufacture, Vienna, Austria, 9-11 October 2012.
- Elkaseer, A., Bigot, S., Surleraux, A. and Rosochowski, A. 2013. Effect of material microstructure on the micro-EDM process. Presented at: 8th International Conference on MicroManufacturing (ICOMM2013), Victoria, Canada, 25-28 March 2013.
- Bigot, S., Surleraux, A., Bissacco, G. and Valentinčič, J. 2012. A new modelling framework for die-sinking micro EDM. Presented at: 9th International Conference on Multi-Material Micro Manufacture, Vienna, Austria, 9-11 October 2012.
- Minev, R., Minev, E. and Bigot, S. 2012. Capability study of MNT processes using Grid Method. Presented at: 9th International Conference on Multi-Material Micro Manufacture, Vienna, Austria, 9-11 October 2012.
- Bigot, S., Dorrington, P. and Dimov, S. S. 2011. Manufacturing routes costs comparison for emerging micro and nano technologies. Presented at: 7th International Conference on Multi-Material Micro Manufacture, Bourg en Bresse and Oyonnax, France, 17-19 November 2010 Presented at Fillon, B., Khan-Malek, C. and Dimov, S. eds.Proceedings of the 7th International Conference on Multi-Material Micro Manufacture, 17-19 November 2010 Bourg en Bresse and Oyonnax, France. Singapore: Research Publishing pp. 199-202., (10.3850/978-981-08-6555-9_135)
- Bigot, S., Bissacco, G. and Valentinčič, J. 2011. Die-sinking micro EDM for complex 3D structuring - research directions. Presented at: 8th International Conference on Multi-Material Micro Manufacture, Stuttgart, Germany, 8–10 November 2011.
- Gonzalez Castro, G., Babenko, M., Bigot, S., Sweeney, J., Ugail, H. and Whiteside, B. R. 2011. Thermal contact resistance in micromoulding. Presented at: Polymer Process Engineering '11, Bradford, UK, 6-7 December 2011.
- Pham, D. T., Eldbib, K., Bigot, S. and Packianather, M. S. 2010. A data ordering method for the RULES family of algorithms. Presented at: I*PROMS 2009 Conference :Innovative Production Machines and Systems, Cardiff, UK, July 6-17 2009 Presented at Pham, D. T., Eldukhri, E. E. and Soroka, A. J. eds.Innovative production machines and systems: fifth I*PROMS Virtual Conference, 6-17th July 2009. Dunbeath: Whittles pp. 200-205.
- Brousseau, E. B. J. P., Barton, R., Dimov, S. S. and Bigot, S. 2010. A methodology for evaluating the technological maturity of micro and nano fabrication processes.. Presented at: Fifth International Precision Assembly Seminar, IPAS 2010, Chamonix, France. pp. 329-336.
- Bigot, S., Dimov, S. S. and Minev, R. 2010. Function and length scale integration study in emerging MST-based products. Presented at: 5th IPAS Fifth International Precision Assembly Seminar, Chamonix, France.
- Bigot, S., Minev, R., Dobrev, T., Dimov, S. S. and Matthews, C. 2009. Function and length scale integration in micro/nano manufacturing. Presented at: 4M2009 -First International Conference on Multi-Material Micro Manufacture, Karlsruhe, Germany. pp. 147-152.
- Bigot, S. 2009. A study of specialisation and classification heuristics used in covering algorithms. Presented at: IPROM2009 Innovative Production Machines and Systems Fifth I*PROMS Virtual Conference, Cardiff, UK.
- Dimov, S. S. et al. 2009. 4M Network of Excellence, Progress Report 2009. Presented at: International Conference on Multi-Material Micro Manufacture (4M2009), Karlsruhe, Germany. pp. 1-9.
- Valentincic, J., Bissacco, G. and Bigot, S. 2009. Snapshot of micro EDM technology for industry. Presented at: International Conference on Multi-Material Micro Manufacture (4M2009), Karlsruhe, Germany. pp. 415-418.
- Brousseau, E. B. J. P., Barton, R., Dimov, S. S. and Bigot, S. 2009. Technology maturity assessment of micro and nano manufacturing processes. Presented at: 4M2009 - International Conference on Multi-Material Micro Manufacture, Karlsruhe, Germany. pp. 257-262.
- Bigot, S., Islam, N., Wong, H., Brousseau, E. B. J. P. and Dorrington, P. 2009. Micro and nano manufacturing Technologies - Adoption Behaviour & Challenges. Presented at: 10th International Conference on Management of Innovative Technologies, Fiesa, Slovenia.
- Griffiths, C. A., Dimov, S. S., Brousseau, E. B. J. P., Chouquet, C., Gavillet, J. and Bigot, S. 2008. Micro-injection moulding: surface treatment effects on part demoulding. Presented at: 4th International Conference on Multi-Material Micro Manufacture (4M), Cardiff, UK, 9-11 September 2008 Presented at Dimov, S. and Menz, W. eds.4M 2008 : Fourth International Conference on Multi-Material Micro Manufacture, 9th-11th September 2008, Cardiff, UK. Dunbeath: Whittles pp. 245-248.
- Nestler, J. et al. 2008. Microfluidic cartridge for protein assays with integrated pumps. Presented at: 1st European Conference on Microfluidics, Bologna, Italy.
- Gavillet, J. et al. 2008. Nanostructured polymer thin films: application to biosensors. Presented at: Nanomat 2006, Rio de Janeiro, Brazil, 5-8 June 2006 Presented at Dos Santos, D. S. ed.Metastable and Nanostructured Materials III. Materials Science Forum pp. 10-18.
- Nestler, J. et al. 2008. An all-polymer microfluidic system for protein sensing applications with integrated low-cost pumps, surface modification and sealing. Presented at: Smart Systems Integration 2008, Barcelona, Spain, 9-10 April 2008.
- Nestler, J. et al. 2008. low-cost, fully intergrated liquid handling platform for protein assays. Presented at: 12th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS 2008), San Diego, USA.
- Bigot, S. 2008. A Fuzzy Rule Induction System with a New Rule Space Representation Scheme. Presented at: Proceedings 4th CIRP International Seminar on Intelligent Computation in Manufacturing Engineering, CIRP ICME '08, Naples, Italy.
- Auerswald, J. et al. 2007. Bonding of glass chip based SPR sensors to thermoplastic microfluidics scaffolds. Presented at: Smart Systems Integration 2007, Paris, France, 27-28 March 2007.
- Hiller, K. et al. 2007. Integration aspects of a polymer based SPR biosensor with active micro optical and micro fluidic elements. Presented at: Smart Systems Integration 2007, Paris, France, 27-28 March 2007.
- Griffiths, C. A., Bigot, S., Brousseau, E. B. J. P., Worgull, M., Heckele, M., Nestler, J. and J., A. 2007. Polymer insert tooling for prototyping of micro fluidic components in micro injection moulding. Presented at: 3rd International Conference on Multi-Material Micro Manufacture, Borovets, Bulgaria, 3-5 October 2007 Presented at Dimov, S., Menz, W. and Toshev, Y. eds.Proceedingsof the 3rd International Conference on Multi-Material Micro Manufacture (4M2007), Borovets, Bulgaria. pp. 305-308.
- Nestler, J. et al. 2007. Electrochemical microfluidic pumps based on super absorbing polymers. Presented at: 11th International Conference on Proceedings - Miniaturized Systems for Chemistry and Life Sciences Paris (uTAS2007), Paris, France. pp. 1504-1506.
- Nestler, J., Morschhauser, A., Hiller, K., Otto, T., Bigot, S. and Gessner, T. 2007. Polymer Lab-on-Chip systems with integrated electrochemical pumps. Presented at: Proceedings of International Conference on Multi-Material Micro Manufacture (4M2007), Borovets, Bulgaria. pp. 319-322.
- Pham, D. T. et al. 2007. Recent advances in micro and nano manufacturing. Presented at: Proceedings of 4th International Conference on Digital Enterprise Technology (DET2007), Bath, UK. pp. 24-33.
- Azcarate, S., Uriarte, I. L., Schoth, A., Bigot, S., Tosello, G., Roth, S. and Staemmler, L. 2006. Hybrid tooling: A review of process chains for tooling microfabrication within 4M. Presented at: Proceedings of the 2nd International Conference on Multi-Material Micro Manufacture, 4M, Grenoble, France.
- Bigot, S., Valentincic, J., Blatnik, O. and Junkar, M. 2006. Micro EDM parameters optimisation. Presented at: Proceedings of the 2nd International Conference on Multi-Material Micro Manufacture, 4M2006, Grenoble, France.
- Nestler, J. et al. 2006. A new technology platform for fully integrated polymer based micro optical fluidic systems. Presented at: Proceedings of the 2nd International Conference on Multi-Material Micro Manufacture (4M2006), Grenoble, France.
- Bigot, S., Popov, K. B. and Ivanov, A. 2005. A study of the micro EDM electrode wear. Presented at: 4M 2005: 1st International Conference on Multi-Material Micro Manufacture, Forschungszentrum Karlsruhe, Karlsruhe, Germany, 29 June - 1 July 2005 Presented at Menz, W. and Dimov, S. S. eds.Proceedings: 4M 2005: 1st International Conference on Multi-Material Micro Manufacture. Amsterdam: Elsevier
- Pham, D. T., Dimov, S. S., Bigot, S., Ivanov, A. and Popov, K. B. 2005. Micro EDM drilling: Accuracy study. Presented at: 5th International Conference on Integrated Design and Manufacturing in Mechanical Engineering, Bath, UK, 5- 7 April 2004 Presented at Bramley, A. et al. eds.Advances in Integrated Design and Manufacturing in Mechanical Engineering. Springer pp. 281-294.
- Pham, D. T., Packianather, M. S., Dimov, S. S., Soroka, A. J., Gerard, T., Bigot, S. and Salem, Z. 2004. An application of datamining and machine learning techniques in the metal industry. Presented at: Proceedings 4th CIRP International Seminar on Intelligent Computation in Manufacturing Engineering, Sorrento, Italy. pp. 617-620.
- Pham, D. T., Bigot, S. and Dimov, S. S. 2004. A new technique for fuzzy rule induction. Presented at: Proceedings 4th CIRP International Seminar on Intelligent Computation in Manufacturing (ICME '04), Sorrento, Italy. pp. 621-626.
- Dimov, S. S., Pham, D. T., Bigot, S., Ivanov, A. and Popov, K. B. 2004. A Study of the Accuracy of the Micro Electrical Discharge Machining Drilling Process. Presented at: 5th International Conference on Integrated Design and Manufacturing in Mechanical Engineering, Bath, UK, 5- 7 April 2004Proceedings of the 5th International Conference on Integrated Design and Manufacturing in Mechanical Engineering,( IDMME) (Bath, UK). University of Bath pp. 1-12.
- Pham, D. T., Dimov, S. S. and Bigot, S. 2002. A new pruning technique for inductive learning. Presented at: Proceedings of the 3rd CIRP International Seminar on Intelligent Computation in Manufacturing Engineering(ICME 2002), Ischia, Italy. pp. 449-454.
Research
Contracts
Project Title |
Awarding body |
End |
Value |
As Principal Investigator |
|||
Manuela - Additive Manufacturing using Metal Pilot Line |
EC - H2020 |
2022 |
£400,018 |
An innovative product produced combining ALM & laser ablation of microstructures |
Renishaw plc |
2019 |
£18,604 |
Characteristics of novel polymers |
WAG |
2018 |
£19,300 |
Increasing Efficiency of Robotic Dispensing |
WAG |
2018 |
£83,000 |
Laser Post Processing of ALM Components |
Renishaw plc |
2017 |
£10,628 |
ECO-Laserfact-EC)-efficient LASER technology FACTories of the future |
EC |
2015 |
£123,091 |
Thermal contact resistance modelling for polymer processing |
EPSRC |
2014 |
£132,336 |
Micro Enterprise and Emergent Technologies Lab (MEET Lab) |
A4B |
2014 |
£148,379 |
An advanced modelling approach for micro EDM wear analysis |
EPSRC |
2013 |
£96,426 |
An advanced modelling approach for micro EDM wear analysis |
EPSRC |
2013 |
£96,426 |
Flexible Compression Injection Moulding Platform for Multi-Scale Surface Structures |
EC |
2013 |
£271,927 |
Visiting Fellowship - Prof IH Witten |
RAEng |
2012 |
£4,402 |
RCUK Fellowships |
EPSRC |
2010 |
£102,196 |
As Co-Investigator |
|||
3D reconstruction and characterisation of spattering behaviours in SLM processing… |
Renishaw plc |
2020 |
£19,993 |
Embeddable sustained release microneedles for contraceptive delivery |
B&M Gates Foundation |
2019 |
£606,709 |
Astute - Advanced Sustainable Manufacturing Technology |
WEFO |
2015 |
£1,903,117 |
Upgrading the small equipment base for early career researchers in the Engineering and Physical Sciences |
EPSRC |
2013 |
£498,326 |
Access to nanoscience and nanotechnology equipment at Cardiff |
EPSRC |
2012 |
£269,285 |
Converging technologies for micro systems manufacturing - COTECH |
EC |
2012 |
£245,118 |
Total |
£5,049,281 |
Teaching
Year 4 tutor - MEng Mechanical and Medical engineering teaching programme.
Past and Current Undergraduate Teaching topics: Materials and Manufacturing, Object Oriented Programming, Mathematics, Engineering Applications (CAD, Design and labs), Mechanical Lab, Business Management, Automotive Design.
PhD and MSc projects topics: Advanced Manufacturing, Machine Learning, micro manufacturing, additive manufacturing/3D printing
Biography
I studied an MEng in mechanical and manufacturing engineering at the Ecole National d'Ingénieur de Tarbes in France and completed a PhD in machine learning in Cardiff University. My current research focus is on the development and characterisation of micro manufacturing and metal Additive Manufacturing technologies, including the use of machine learning techniques, for the cost-effective fabrication of innovative products. Throughout my academic carrier, I have been coordinator of, and contributor to, several industrial, national and European multidisciplinary research projects.
- Fellow of the Higher Education Academy
- Conference scientific committee member and regular session chair for 4 International Conferences (4M, MIT slovenia, SDM, WCMNM)
- Scientific chair for the World Congress on Micro and Nano Manufacturing 2018.
- Member of the 4M association Executive Committee (http://www.4m-association.org/).
Honours and awards
Received, from the Society of Manufacturing Engineers (USA), the 2007 SME Kuo K. Wang Outstanding Young Manufacturing Engineer Award.
Received a fellowship (2006 -2010) funded by the Research Councils of the United Kingdom to conduct research in Innovative Manufacturing.
Supervisions
- Advanced Manufacturing
- Micro Manufacturing (Laser Ablation, micro EDM, modelling/simulation)
- Additive Layer Manufacturing/3D Printing
- Machine learning/Artificial Intelligence applied to manufacturing
Current supervision
LÉopold Le Roux
Contact Details
+44 29208 75946
Queen's Buildings - North Building, Room N0.55, 5 The Parade, Newport Road, Cardiff, CF24 3AA